
● For surface mounted applications 适用于表面贴装
● Low reverse leakage current 反向漏电流小
RoHS
● Low forward voltage drop 正向压降低
COMPLIANT
● High surge capacity 耐浪涌能力高
● Meet UL flammability classification 94V-0 符合UL 94V-0阻燃等级
● Case: JEDEC SMB molded plastic 封装:SMB塑封
● Polarity: Color band denotes cathode 极性:阴极色环标识
● Mounting position: Any 安装位置:不限
● For use in low voltage, high frequency inverters,
polarity protection applications
应用于低压,高频变换器,极性保护
Maximum Ratings and Electrical Characteristics 最大额定值及电气特性
Rating at 25℃ ambient temperature unless otherwise specified. 环境温度25℃,除非特别说明。
Single phase, half wave, 60Hz, resistive or inductive load. 单相半波, 60Hz, 阻性或感性负载。
For capacitive load, derate current by 20%. 对于电容性负载,降低20%的额定电流。
S3AB S3BB S3DB S3GB S3JB S3KB S3MB
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage 最大有效反向电压
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 最大直流阻断电压
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current @TL=75 ℃
Peak Forward Surge Current, 8.3mS Single Half Sine-Wave,
Superimposed on Rated Load (JEDEC Method)
8.3mS单一正弦半波叠加在额定负载上的浪涌能力(JEDEC方法)
I
2
t Rating for Fusing (t<8.3mS) 熔断额定值 (t<8.3mS) I
2
t A
2
s
Peak Forward Voltage at 3.0A DC (Note1)
Maximum DC Reverse Current @TJ=25℃
at Rated DC Blocking Voltage @TJ=125℃
Typical Junction Capacitance (Note 2) 典型结电容
CJ pF
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
Operating Junction Temperature Range 结温工作范围
TJ
℃
Storage Temperature Range 储存温度范围
TSTG
℃
Notes: 1. 300uS pulse width, 2%duty cycle. 300uS脉宽,2%占空比。
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 在1MHz,4.0V条件下测试
3. The typical data above is for reference only . 典型值仅供参考。
S3*B-13-00-00
Rev. 9, 30-Jan-2019
Forward Current - 3.0 Amperes
正向电流 3.0A
Surface Mount Glass Passivated Rectifiers
贴片式玻璃钝化整流器
Package Outline Dimensions in Inches (Millimeters)
Reverse Voltage - 50 to 1000Volts
反向电压 50-1000V