Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Maximum Ratings
Operating Temperature -55°C to 85°C
Storage Temperature -55°C to 100°C
Absolute Max. Supply Voltage (Vcc) 6V
Absolute Max. Tuning Voltage (Vtune) 16V
All specications 50 ohm system
REV. A
M152326
EDR-9992F2
ZX95-975+
RAV
150923
Page 1 of 2
Electrical Specications
Coaxial
Voltage Controlled Oscillator
Linear Tuning 900 to 975 MHz
ZX95-975+
CASE STYLE: GB956
Connectors Model
SMA
ZX95-975-S+
Permanent damage may occur if any of these limits are exceeded.
• Linear tuning characteristics
• Low phase noise
• Low pulling
• Low pushing
• Protected by US patent 6,790,049
Features
• R&D
• LAB
• Instrumentation
• Wireless communications
• Line for receiver
• Defence systems
• Land mobile
• GSM
Applications
MODEL
FREQ. POWER PHASE NOISE TUNING NON HARMONICS PULLING PUSHING DC
NO.
(MHz) OUTPUT dBc/Hz SSB at offset HARMONIC (dBc) pk-pk (MHz/V) OPERATING
(dBm) frequencies,kHz VOLTAGE SENSI- PORT 3 dB SPURIOUS @12 dBr POWER
RANGE TIVITY CAP MODULATION (dBc) (MHz)
Typ. (V) (MHz/V) (pF) BANDWIDTH Vcc Current
(MHz) (volts) (mA)
Min. Max. Typ. 1 10 100 1000 Min. Max. Typ. Typ. Typ. Typ. Typ. Max. Typ. Typ. Max.
ZX95-975+
900 975 +0.8 -90 -114 -135 -154 0.5 14 8 35 70 -90 -25 -15 0.3 0.3 5 40
Outline Drawing
Outline Dimensions ( )
inch
mm
A B C D E F G H J K L M N P Q R S T wt.
1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106
grams
30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
http://www.minicircuits.com/app/AN40-010.pdf
http://www.minicircuits.com/app/AN40-010.pdf
http://www.minicircuits.com/app/AN40-010.pdf
NOTE: When soldering the DC connections, caution must be used to avoid
overheating the DC terminals. See Application Note AN-40-10 .
!