Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 3
Product Overview
Mini-Circuits’ ZX60-33LNR+ is a wideband low noise connectorized amplifier providing a unique combination of low
noise figure, and high IP3 over a wide frequency range, supporting a wide range of sensitive, high-dynamic range re-
ceiver applications and many systems where high performance over wideband is needed. This design operates on a
single 5V supply and comes in a rugged, compact unibody case (0.74 x 0.75 x 0.46”) with SMA connectors, making it an
excellent candidate for tough operating conditions and crowded system layouts.
The Big Deal
• Wideband, 50 to 3000 MHz
• Output power up to 19 dBm typ.
• Low noise figure, 1.1 dB typ.
• High OIP3, up to +35 dBm typ.
• Protected by US patent 6,790,049
Case Style: GC957
Low Noise Amplifier
Coaxial
ZX60-33LNR+
50Ω 50 to 3000 MHz
Key Features
Feature Advantages
Wideband 50 to 3000 MHz able to work from
20 to 3300 MHz
Enables a single amplifier to be used in a wide range of applications including cellular, GPS,
bluetooth , defense, instrumentation and more.
Low noise over the whole band, 1.1 dB typ. Enables lower system noise figure performance.
High gain, 17.5 dB typ. Reduces the number of gain stages, lowering component count and overall system cost.
High IP3, up to 35 dBm typ.
The combination of low noise and high IP3 makes the ZX60-33LNR+ ideal for use in low noise
receiver front end (RFE) as it gives the user the advantages of sensitivity and two-tone IM perfor-
mance at both ends of the dynamic range.
Rugged, unibody construction
Mini-Circuits unibody construction integrates the RF connector into the case body, providing high
reliability and excellent survivability in critical applications.
