A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
REV. D
M154107
ZX47-55+
ZX47-55LN+
EDR-7798U
EDR-7798/2RE
URJ/RAV
151215
Page 1 of 4
Operating Temperature -40°C to 85°C
Storage Temperature -55°C to 100°C
DC Power:
Max. voltage 5.7V
Max. current 120mA
Internal Power Dissipation 0.73W
Input Power +18dBm
CASE STYLE: HN1173
Notes:
1. The negative slope indicates that Output Voltage decreases as Input Power increases.
See "Output Voltage vs Input Power" graph below.
2. Temperature sensor output provides a DC Output Voltage which increases linearly with temperature rise.
Recommended minimum load for this port is 2 kΩ.
3. Recommended minimum load at DC out port is 100 Ω. See maximum ratings for no damage.
Connectors Model
SMA ZX47-55-S+
SMA ZX47-55LN-S+
Maximum Ratings
Electrical Specications (T
AMB
= 25°C)
• Low Noise (Output Ripple) for ZX47-55LN+,
20mVp-p Typ. @ 10MHz
• High Dynamic Range
• Wide Bandwidth
• Single Supply Voltage: +5V
• Stability Over Temperature
• Built-in Temperature Sensor
• Protected by US patent 6,790,049
Features
• RF/IF Power Measurements
• Low Cost Power Monitoring System
• RF Leakage Monitors
• Fast feedback Levelling Circuits
• RF Power Control
• Receiver RF/IF Gain Control
• RSSI measurements
Applications
ZX47-55+
ZX47-55LN+
Power Detector
50Ω, -55dBm to +10dBm, 10 to 8000 MHz
Coaxial
Output Voltage Vs Input Power @ +25
o
C
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
-55 -45 -35 -25 -15 -5 5 15
Input Power (dBm)
Output Voltage (V)
8000MHz
6000MHz
5000MHz
2000MHz
1000MHz
10MHz
Outline Drawing
Simplied Functional Diagram
RF IN 1
DC OUT 5
Vcc (+5V) 2
TEMPERATURE SENSOR 4
GROUND 3
Coaxial Connections
Output Load=1000Ω
FREQ.
(MHz)
DYNAMIC
RANGE AT
±1dB
ERROR
(dBm)
OUTPUT
VOLT.
RANGE
(V)
SLOPE
(mV/dB)
(Note 1)
VSWR
(:1)
PULSE
RESPONSE
TIME
(nSec)
Typ.
TEMP.
SENSOR
OUTPUT
SLOPE
(mV/°C)
(Note 2)
DC
OPERATING
POWER
Vcc
(Volts)
Note 3
Current
(mA)
Min. Max. Typ. Typ. Typ. Typ.
ZX47-55+ ZX47-55LN+
Typ.
Min. Typ. Max. Typ.Rise Fall Rise Fall
10 1000 -50 to +5
0.50 - 2.10
-25
1.05
400 10 800 400 2.00 4.5 5.0 5.5 100
1000 5000 -55 to 0 1.40
5000 6000 -50 to +5 1.50
6000 8000 -45 to +10 1.30
Permanent damage may occur if any of these limits are exceeded.
TEMP SENSOR
OUT
RF IN
Vcc
DC O
TEMPERATURE SENSOR
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
A B C D E F G H J K
1.20 .69 .46 1.12 .04 .34 .46 .28 .33 .21
30.48 17.53 11.68 28.45 1.02 8.64 11.68 7.11 8.38 5.33
Outline Dimensions ( )
inch
mm
L M N P Q R S T wt.
.18 .14 .94 .50 .35 .18 .106 .60 grams
4.57 3.56 23.88 12.70 8.89 4.57 2.69 15.24 31.8
NOTE: When soldering the DC connections, caution
must be used to avoid overheating the DC terminals.
See Application Note AN-40-10 .
!
