Page 1 of 4
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
50Ω 10W 10 to 2000 MHz
The Big Deal
• Saturated power, 10W
• Wide bandwidth, 10 to 2000 MHz
• High gain, 50 dB typ.
• Self-protected from excessive drive, heat, and
reverse polarity
• Withstands short and open circuit at output
while delivering up to 10W
Product Overview
The ZHL-10W-202-S+ is a Class AB, high-power amplifier providing 10W saturated power over the 10 to 2000
MHz band, ideal for a variety of high-power test setups as well as applications including communications,
radar and more. The ruggedly-designed amplifier provides unconditional stability and built-in self-protection
against reverse polarity, excessive drive and overheating. The amplifier’s output stage is further protected
in the event of a fault condition, allowing high power operation into an OPEN or SHORT load (refer to the
maximum input power specifications). Housed in a rugged aluminum alloy case measuring 4.3 x 6.7 x 1.2”,
the unit features SMA connectors and an optional heat sink and fan attachment for cooling.
Key Features
Feature Advantages
Ultra Wideband, usable from 10 to 2200 MHz
Suitable for a broad range of high-power, wideband applications, including test setups,
communications and defense applications.
High gain, 50 dB Enables signal amplification to 10W output without the need for multiple gain stages.
Built-in self-protection
In instances of potentially-damaging excessive drive current, heat buildup within the
housing, unshorting of DC supply, and short or open loads at the output, an automatic
sensing feature signals the unit to power down.
Unconditional stability Provides reliable performance independent of input and load conditions.
High Power Amplier
Coaxial
ZHL-10W-202-S+
ZHL-10W-202- S+ ZHL-10W-202X-S +