© Semiconductor Components Industries, LLC, 2009
June, 2009− Rev. 2
1 Publication Order Number:
Z0103MA/D
Z0103MA, Z0107MA,
Z0109MA
Sensitive Gate Triacs
Series
Silicon Bidirectional Thyristors
Designed for use in solid state relays, MPU interface, TTL logic and
any other light industrial or consumer application. Supplied in an
inexpensive TO−92 package which is readily adaptable for use in
automatic insertion equipment.
Features
• One−Piece, Injection−Molded Package
• Blocking Voltage to 600 V
• Sensitive Gate Triggering in Four Trigger Modes (Quadrants) for all
possible Combinations of Trigger Sources, and especially for Circuits
that Source Gate Drives
• All Diffused and Glassivated Junctions for Maximum Uniformity of
Parameters and Reliability
• Improved Noise Immunity (dv/dt Minimum of 10 V/msec at 110°C)
• Commutating di/dt of 1.6 A/msec at 110°C
• High Surge Current of 8 A
• These are Pb−Free Devices
MAXIMUM RATINGS (T
J
= 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off-State Voltage
(T
J
= −40 to +125°C)
(1)
Sine Wave 50 to 60 Hz, Gate Open
V
DRM,
V
RRM
600 V
On-State RMS Current
Full Cycle Sine Wave 50 to 60 Hz
(T
C
= +50°C)
I
T(RMS)
1.0 A
Peak Non−Repetitive Surge Current
One Full Cycle, Sine Wave 60 Hz
(T
C
= 110°C)
I
TSM
8.0 A
Circuit Fusing Considerations (t = 8.3 ms) I
2
t 0.35 A
2
s
Average Gate Power (T
C
= 80°C, t v 8.3 ms) P
G(AV)
1.0 W
Peak Gate Current (t v 20 ms, T
J
= +125°C)
I
GM
1.0 A
Operating Junction Temperature Range T
J
−40 to
+125
°C
Storage Temperature Range T
stg
−40 to
+150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. V
DRM
and V
RRM
for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
TRIACS
1.0 AMPERE RMS
600 VOLTS
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
ORDERING INFORMATION
MT1
G
MT2
TO−92 (TO−226AA)
CASE 029
STYLE 12
PIN ASSIGNMENT
1
2
3
Gate
Main Terminal 2
Main Terminal 1
1
2
3
1
2
BENT LEAD
TAPE & REEL
AMMO PACK
STRAIGHT LEAD
BULK PACK
3
123
Z01
10xMA
YWW G
G
MARKING DIAGRAM
x = 3,7,9
Y = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
