H5CL
H5CL
2
Specifications
Item H5CL-Aj
(AC models)
H5CL-ADj
(DC models)
Classification
Digital timer
Mounting
DIN track, surface, and flush mounting
(common)
Flush mounting
External connections
Socket
Screw terminals
Enclosure ratings
Panel surface: IEC IP66 and NEMA T
ype 4 (indoors) when Y92S-29 rubber packing is used.
Digits
4 digits (zero suppress method)
Max. time settings
9.999 s (0.001-s unit), 99.99 s (0.01-s unit), 999.9 s (0.1-s unit), 9999 s (1-s unit),
99 min 59 s (1-s unit), 999.9 min (0.1-min unit), 99 h 59 min (1-min unit), 999.9 h (0.1-h unit)
Display modes
Up (increment) and Down (decrement) (selectable)
Input signals Start, gate, reset, and key protection
Input method No-voltage input: via NPN transistor or switching of contact
Operating modes
A (signal ON-delay), F (accumulative operation) (selectable)
Reset system
Power reset (A (signal ON-delay) mode only), external, manual resets
Sensor waiting time
216 ms typ., 250 ms max. (Control output is turned OFF and no input is accepted during
sensor waiting time.)
External power supply
50 mA at 12 VDC (
±10%) ---
Display
7-segment LEDs (12 mm high, red LEDs for the present value, and 8 mm high, green LEDs for
the set value)
Memory backup
EEP-ROM (overwritten 200,000 times min.), which can store data for 20 years min.
Mounting method
DIN track mounting, surface mounting, and
flush mounting
Flush mounting
Approved standards
UL 508, CSA C22.2 No.14
Conforms to EN61010-1
Ratings
Item H5CL-Aj
(AC models)
H5CL-ADj
(DC models)
Rated supply voltage
100 to 240 V
AC, 50/60 Hz
12 to 24 VDC (permissible ripple: 20% (p-p) max.)
Operating voltage range
85 to 264 V
AC, 50/60 Hz
10.8 to 26.4 VDC
Power consumption
Approx. 10 V
A
Approx. 3 W
Start, reset, gate inputs
Min. pulse width: 1 ms/20 ms (selectable, same for all three inputs)
Key protection input
Response time: 1 s max.
Power reset
Min. power opening time: 0.5 s (excluding F (accumulative operation) mode)
Control output
Contact output:
SPDT
, 3 A at 250 V
AC, resistive load (cosφ
=1)
Min. applicable load: 10 mA at 5/24 VDC (P level, for reference value)
T
ransistor output:
NPN open collector
, 100 mA max. at 30 VDC max.,
residual voltage 1.5 VDC max.
