FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
LS
Model Number
VFR
XXXX
S102C
ST
1)
H
L
Date Code
W
Front View Rear View
Lead Material #22 AWG
Round Solder Coated Copper
Optional Customer Part Number
Print specification, etc. if required
Resistance
Value Code
Tolerance
XXXXXX
100R01
0.01 %
LL
SW
10
Week
01
Year
(Pb - free coating available)
Note
1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.
2. The standoffs shall be so located as to give a lead clearance o
f 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board.
TABLE 2 - MODEL SELECTION
MODEL
NUMBER
RESISTANCE
RANGE
()
MAXIMUM
WO
RKING
VOLTAGE
AMBIENT
POWER
RATING
AVERAGE
WE
IGHT
IN GRAMS
DIMENSIONS
TIGHTEST
T
OLERANCE
VS. LOWEST
RESISTANCE
VALUE
at
+
70 °C
at
+ 125 °C
INCHES mm
F
(1)
(INCHES)
S102C
(
S102J)
(2)
1 to 150K
300
0.6 W 0.3 W
0.6
W: 0.105 ± 0.010
L: 0.300 ± 0.0
10
H: 0.326 ± 0.010
ST: 0.010 min.
SW: 0.040 ± 0.005
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.254
min.
1.02 ± 0.13
25.4 ± 3.18
3.81 ± 0.13
0.005 %/50
0.01 %/25
0.02 %/12
0.05 %/5
0.1 %/2
0.50 %/1
1 %/0.5
up to 100K
S102K
(
S102L)
(2)
1 to 100K
0.4 W 0.2 W
over 100K
S104D
(
S104F)
(1)
1 to 500K
350
1.0 W 0.5 W
1.4
W: 0.160 max.
L
: 0.575 max.
H: 0.413 max.
ST: 0.035 ± 0.005
SW: 0.050 ± 0.005
LL: 1.000 ± 0.125
LS: 0.400 ± 0.020
4.06 max.
14.61 max.
10.49 max.
0.889 ± 0.13
1.27 ± 0.13
25.4 ± 3.18
10.16 ± 0.51
(0.138)
(
0.565)
(0.413)
up to 200K
S104K 1 to 300K
0.6 W 0.3 W
over 200K
S105D
(
S105F)
(1)
1 to 750K
350
1.5 W 0.75 W
1.9
W: 0.160 max.
L
: 0.820 max.
H: 0.413 max.
ST: 0.035 ± 0.005
SW: 0.050 ± 0.005
LL: 1.000 ± 0.125
LS: 0.650 ± 0.020
4.06 max.
20.83 max.
10.49 max.
0.889 ± 0.13
1.27 ± 0.13
25.4 ± 3.18
16.51 ± 0.51
(0.138)
(
0.890)
(0.413)
(0.7 ± 0.05)
up to 300K
S105K 1 to 500K
0.8 W 0.4 W
over 300K
S106D 0.5 to 1M
500
2.0 W 1.0 W
4.0
W: 0.260 max.
L
: 1.200 max.
H: 0.413 max.
ST: 0.035 ± 0.005
SW: 0.050 ± 0.005
LL: 1.000 ± 0.125
LS: 0.900 ± 0.020
6.60 max.
30.48 max.
10.49 max.
0.889 ± 0.13
1.27 ± 0.13
25.4 ± 3.18
22.86 ± 0.51
up to 400K
S106K 0.5 to 600K
1.0 W 0.5 W
over 400K
www.vishayfoilresistors.com For any questions, contact Document Number: 63001
2 foil@vpgsensors.com Revision: 02-Mar-15
S Series
Notes
(1)
S104F and S105F have different package dimensions (see the third column of dimensions). All other specifications are the same.
(2)
0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.