ASM CAT-WS-E-05 57
www.asm-sensor.com
Output Specifications
R1K and 10V for WS position sensors
Voltage divider R1K
Potentiometer
Excitation Voltage
32 VDC max. at 1 kW (input power 1 W max.)
Potentiometer Impedance
1kW±10%
Thermal coefficient ±25 x 10
-6
/ °C full scale
Sensitivity Depends on measurement range, individual
sensitivity of sensor specified on label
Voltage Divider Utilization Range Approx. 3% ... 97% of full range
Operating Temperature -20 ... +85 °C
Signal conditioner 10V
Voltage output
Excitation Voltage +18 ... +27 V DC non stabilized
Excitation Current 20 mA max.
Output Voltage 0 ... +10 V DC
Output Current 2 mA max.
Output Load
>5kW
Stability (Temperature) ±50 x 10
-6
/ °C full scale
Protection Reverse polarity, short circuit
Output Noise 0,5 mV
RMS
Operating Temperature -20 ... +85 °C
EMC According to EN 61326:2004
Signal Wiring
Output signals
R1K 10V Cable color
Connector
pin no.
+ Vin Excitation + White 1
GND Excitation GND Brown 2
+ Vout Signal + Green 3
Signal GND Yellow 4
View to solder
terminals
Note: The potentiometer must be connected
as a voltage divider. The input impedance of
the following processing circuit should be 10
MW min.
Signal diagram
Signal diagram
+ Vout
+ Vin
GND
Excitation GND
Excitation +
Signal GND
Signal +
Connection
Mating Connector
10V
0...10 V
CONN-DIN-8F-W
CONN-M12-8F-G