• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • WS064J0SBFW00 PDF文件及第18页内容在线浏览

WS064J0SBFW00

WS064J0SBFW00首页预览图
型号: WS064J0SBFW00
PDF文件:
  • WS064J0SBFW00 PDF文件
  • WS064J0SBFW00 PDF在线浏览
功能描述: 128/64 Megabit (8/4 M x 16-Bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst Mode Flash Memory
PDF文件大小: 2245.3 Kbytes
PDF页数: 共97页
制造商: SPANSION[SPANSION]
制造商LOGO: SPANSION[SPANSION] LOGO
制造商网址: http://www.spansion.com
捡单宝WS064J0SBFW00
PDF页面索引
120%
18 S29WS128J/064J S29WS-J_00_A6 May 11, 2006
Data Sheet
Ta b l e 3 . Autoselect Codes (High Voltage Method)
Legend: L = Logic Low = V
IL
, H = Logic High = V
IH
, BA = Bank Address, SA = Sector Address, X = Don’t care.
Notes:
1. The autoselect codes may also be accessed in-system via command sequences.
2. PPB Protection Status is shown on the data bus
Sector/Sector Block Protection and Unprotection
The hardware sector protection feature disables both programming and erase operations in any
sector. The hardware sector unprotection feature re-enables both program and erase operations
in previously protected sectors. Sector protection/unprotection can be implemented via two
methods.
(Note: For the following discussion, the term “sector” applies to both sectors and sector blocks.
A sector block consists of two or more adjacent sectors that are protected or unprotected at the
same time (see
Tab le , “,” on page 18 and Tabl e , “,” on page 21).)
Description CE# OE# WE# RESET#
Amax
to
A12
A11
to
A10
A9 A8 A7 A6
A5
to
A4
A3 A2 A1 A0
DQ15
to DQ0
Manufacturer ID
:
Spansion
L L H H X X
V
ID
X X L X L L L L 0001h
Device ID
Read Cycle 1
L L H H X X
V
ID
X L L L
L L L H 227Eh
Read Cycle 2
H H H L
2218h (WS128J)
221Eh (WS064J)
Read Cycle 3
H H H H
2200h (WS128J)
2201h (WS064J)
Sector Protection
Verification
L L H H SA X
V
ID
X L L L L L H L
0001h (protected),
0000h (unprotected)
Indicator Bits
L L H H X X
V
ID
X X L X L L H H
DQ15 - DQ8 = 0
DQ7 - Factory Lock Bit
1 = Locked, 0 = Not Locked
DQ6 -Customer Lock Bit
1 = Locked, 0 = Not Locked
DQ5 = Handshake Bit
1 = Reserved, 0 = Standard
Handshake
DQ4 & DQ3 - Boot Code
DQ2 - DQ0 = 001
Hardware Sector Group
Protection
L L H H SA X
V
ID
X X X L L L H L
0001h (protected),
0000h (unprotected)
Ta b l e 4 . S29WS128J/064J Boot Sector/Sector Block Addresses for Protection/Unprotection (Sheet 1 of 3)
Sector A22–A12
Sector/
Sector Block Size
SA0 00000000000 4 Kwords
SA1 00000000001 4 Kwords
SA2 00000000010 4 Kwords
SA3 00000000011 4 Kwords
SA4 00000000100 4 Kwords
SA5 00000000101 4 Kwords
SA6 00000000110 4 Kwords
SA7 00000000111 4 Kwords
SA8 00000001XXX, 32 Kwords
SA9 00000010XXX, 32 Kwords
SA10 00000011XXX, 32 Kwords
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价