MORNSUN reserves the copyright Specifications subject to change without notice. WRA_D-10W & WRB_D_10W A/2-2008 Page 1 of 2
WRA_D-10W & WRB_D-10W Series
10W,
2:1 WIDE INPUT ISOLATED & REGULATED
DUAL/SINGLE OUTPUT DC-DC CONVERTER
multi-country patent protection RoHS
PRODUCT PROGRAM
Input Output
Voltage (VDC) Current (mA)
Part
Number
Nominal
Range
Max*
Voltage
(VDC)
Max Min
Efficiency
(%, Typ)
WRA0505D-10W
±5 ±1000 ±100 76
WRA0512D-10W
±12 ±416 ±42 80
WRA0515D-10W
±15 ±333 ±33 82
WRB0505D-10W
5 2000 200 76
WRB0512D-10W
12 833 83 80
WRB0515D-10W
5 4.5-9 11
15 666 66 82
WRA1205D-10W
±5 ±1000
±100 80
WRA1212D-10W
±12 ±416 ±42 82
WRA1215D-10W
±15 ±333 ±33 84
WRB1203D-10W
3.3 3030 300 77
WRB1205D-10W
5 2000 200 80
WRB1212D-10W
12 833 83 82
WRB1215D-10W
15 666 66 84
WRB1224D-10W
12 9-18
20
24 416 42 85
WRA2405D-10W
±5 ±1000
±100 82
WRA2412D-10W
±12 ±416 ±42 84
WRA2415D-10W
±15 ±333 ±33 86
WRB2403D-10W
3.3 3030 300 78
WRB2405D-10W
5 2000 200 82
WRB2412D-10W
12 833 83 84
WRB2415D-10W
15 666 66 85
WRB2424D-10W
24 18-36
40
24 416 42 86
WRA4805D-10W
±5 ±1000
±100 82
WRA4812D-10W
±12 ±416 ±42 84
WRA4815D-10W
±15 ±333 ±33 85
WRB4803D-10W
3.3 3030 300 78
WRB4805D-10W
5 2000 200 82
WRB4812D-10W
12 833 83 83
WRB4815D-10W
15 666 66 85
WRB4824D-10W
48 36-72
80
24 416 42 86
*Input voltage can’t exceed this value, or will cause the permanent damage.
Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically.
Operation under 10% load will not damage the converter; However, they may not meet all specification
listed.
OUTPUT SPECIFICATION
Item Test conditions Min
Typ
Max
Units
Output Power See below products program 1 10 W
Positive Voltage Accuracy
Refer to recommended circuit
±1 ±3
Negative Voltage Accuracy
Refer to recommended circuit
±3 ±5
Load Regulation From 10% To 100% load ±0.5
±1*
Line Regulation(at full load)
Input voltage from low to high
±0.2
±0.5
%
Temperature Drift(Vout) Refer to recommended circuit
±0.03
%/°C
Ripple** 20MHz bandwidth 20 50
Noise** 20MHz bandwidth 85 150
mVp-p
Switching Frequency 100% load, Input voltage range
300
KHz
*Dual output models unbalanced load: ±5%.
**Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter section, application notes.
FEATURES
Wide (2:1) Input Range
DIP package
Efficiency up to 86%
1.5KVDC Input/Output Isolation
Short Circuit Protection(automatic recovery)
Operating Temperature: -40°C to +85°C
Metal Shielding Package
No Heat Sink Required
Industry Standard Pinout
MTBF>1,000,000 hours
RoHS Compliance
APPLICATIONS
The WRA_D-10W & WRB_D-10W Series are
specially designed for applications where a wide
range input voltage power supplies are isolated
from the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is
wide range (voltage range≤2:1);
2) Where isolation is necessary between input
and output(Isolation Voltage ≤ 1500VDC);
3) Where the regulation of the output voltage and
the output ripple noise are demanded.
MODEL SELECTION
Input Voltage
Output Voltage
Package Style
Rated Power
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-
Http://www.mornsun-power.com
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
otherwise specified.
2. See below recommended circuits for more details.