WOMC
Vishay Thin Film
Molded, 50 Mil Pitch, Dual In-Line
Resistor Networks, Wide Body
www.vishay.com For technical questions, contact: thin-film@vishay.com
Document Number: 60010
32 Revision: 15-May-07
SURFACE MOUNT
NETWORKS
DIMENSIONS AND IMPRINTING in inches and millimeters
Lead (Pb)-free example: WOMCTXXXXA
h x 45
°
Index Area
PIN 1 Locator
O
A1
A
C
L
e
B
H
E
DIMENSION
16 20
INCHES MM INCHES MM
H
0.408 10.36 0.408 10.36
E
0.298 7.57 0.298 7.57
O
0.410 10.41 0.500 12.7
A
0.097 2.46 0.097 2.46
e
0.050 1.27 0.050 1.27
B
0.016 0.406 0.016 0.406
C
0.009 0.228 0.009 0.228
L
0.026 0.66 0.026 0.66
A
1
0.007 0.177 0.007 0.177
h
0.015 0.381 0.015 0.381
MECHANICAL SPECIFICATIONS
Resistive Material Passivated Nichrome or Tantalum Nitride
Body Molded Epoxy
Plating Solder
Marking Resistance to Solvents Per MIL-PRF-83401
Substrate Material Silicon
Terminals Copper
Lead Coplanarity ± 0.004
Lead (Pb)-free Option 100 % Sn Matte
Lead (Pb)-free Finish Plated
ORDERING INFORMATION CHECK LIST (CUSTOMS)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free