Specifications
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Supply Voltage
12 V dc or 24 V dc nominal
Absolute operational limits of 10 V dc to 15 V dc and 20 V dc to 27 V dc
Use only with a suitable Class 2 power supply (UL) or a SELV power supply (CE)
Single Color Light Models can be PWM dimmed between 25% to 100% with a
frequency up to 1000 Hz
Spacing Citerion
Vertical: 1.26
Horizontal: 1.26
Operating Temperature
–40 °C to +60 °C (–40 °F to +140 °F)
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Environmental Rating
Rated IEC IP66 and IEC IP67
Suitable for wet locations per UL 2108
Vibration and Mechanical Shock
Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC 60068-2-6
Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27
Construction
Clear anodized aluminum housing; Polycarbonate outer housing, Polyamide end caps
Supply Current
Light Length
Typical Current (A)
at 25°C
1
Max. Current (A)
at -40°C
12 V dc 24 V dc 12 V dc 24 V dc
0220 mm 0.19 0.10 0.24 0.12
0360 mm 0.38 0.20 0.48 0.24
0500 mm 0.57 0.30 0.72 0.36
0640 mm 0.76 0.40 0.96 0.48
0920 mm 1.14 0.60 1.44 0.72
1200 mm 1.52 0.80 1.92 0.96
Connections
2 m (6.5 ft) integral PVC cable, 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style
quick disconnect, or 150 mm (5.9 in) 2-pin Deutsch DTM series sealed cable; models
with a quick disconnect or Deutsch DTM connector require a mating cordset
Do not spray cable with high-pressure sprayer or cable damage will result.
Application Note
When connecting cascadable lights in series, it is important not to exceed maximum
current limitations:
• Maximum length of light at 12 V dc: 2.4 m (7.9 ft)
• Maximum length of light at 24 V dc: 6 m (19.7 ft)
Mounting
Integral mounting slots for M4 (#8) screws, tighten to 5 in·Ibf max torque
Multiple bracket options available
Secure cables within 150 mm (5.9 inches) of the light
Certifications
Dimensions
Models
L1 L2 L3
WLS15..0220.. 146.4 mm (5.76 inches) 194 mm (7.64 inches) 220 mm (8.66 inches)
WLS15..0360.. 286.4 mm (11.28 inches) 334 mm (13.15 inches) 360 mm (14.17 inches)
WLS15..0500.. 426.4 mm (16.79 inches) 474 mm (18.66 inches) 500 mm (19.69 inches)
WLS15..0640.. 566.4 mm (22.3 inches) 614 mm (24.17 inches) 640 mm (25.2 inches)
WLS15..0920.. 846.4 mm (33.32 inches) 894 mm (35.2 inches) 920 mm (36.22 inches)
WLS15..1200.. 1126.4 mm (44.35 inches) 1174 mm (46.22 inches) 1200 mm (47.24 inches)
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the
improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such
purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is
provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com
.
For patent information, see
www.bannerengineering.com/patents
.
1
Values shown at 25°C - current and lumen values decrease 0.4% per 1°C from ambient. For example, a 1200 mm unit will have a maximum current of 1.92 A at -40°C and 1.33 A at +60°C.
WLS15 LED Strip Light
©
Banner Engineering Corp. All rights reserved