• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • W83877TF PDF文件及第97页内容在线浏览

W83877TF

W83877TF首页预览图
型号: W83877TF
PDF文件:
  • W83877TF PDF文件
  • W83877TF PDF在线浏览
功能描述: WINBOND I/O
PDF文件大小: 968.02 Kbytes
PDF页数: 共154页
制造商: WINBOND[Winbond]
制造商LOGO: WINBOND[Winbond] LOGO
制造商网址: http://www.winbond.com
捡单宝W83877TF
PDF页面索引
120%
W83877TF/W83877TG
-90 -
1
2
34567
0
PRTAD0
PRTAD1
PRTAD2
PRTAD3
PRTAD4
PRTAD5
PRTAD6
PRTAD7
This register is used to select the base address of the parallel port. If EPP is disable, the parallel port
can be set from 100H-3FCH on 4-byte boundaries. If EPP is enable, the parallel port can be set from
100H-3F8H on 8-byte boundaries. NCS = 0 and A10 = 0 are required to access the parallel port when
in compatible, bi-directional, or EPP modes. A10 is active in ECP mode.
PRTAD7-PRTAD0 (Bit 7-bit 0): match A[9:2]. Bit 7 = 0 and bit 6 = 0 disable this decode.
11.2.28 Configuration Register 24 (CR24)
When the device is in Extended Function mode and EFIR is 24H, the CR24 register can be accessed
through EFDR. Default = FEH if CR16 bit 2 = 1; default = 00H if CR16 bit 2 = 0. The bit definitions are
as follows:
1
2
34567
0
reserved
URAAD1
URAAD2
URAAD3
URAAD4
URAAD5
URAAD6
URAAD7
This register is used to select the base address of the UART A from 100H-3F8H on 8-byte
boundaries. NCS = 0 and A10 = 0 are required to access the UART A registers. A[2:0] are don't-care
conditions.
URAAD7-URAAD1 (Bit 7-bit 1): match A[9:3]. Bit 7 = 0 and bit 6 = 0 disable this decode.
Bit 0: Reserved, fixed at zero.
11.2.29 Configuration Register 25 (CR25)
When the device is in Extended Function mode and EFIR is 25H, the CR25 register can be accessed
through EFDR. Default = BEH if CR16 bit 2 = 1; default = 00H if CR16 bit 2 = 0. The bit definitions are
as follows:
1
2
34567
0
reserved
URBAD1
URBAD2
URBAD3
URBAD4
URBAD5
URBAD6
URBAD7
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价