W25Q80BL
Publication Release Date: July 08, 2010
- 61 - Preliminary - Revision C
10. ELECTRICAL CHARACTERISTICS
(1)
10.1 Absolute Maximum Ratings
(2)
PARAMETERS SYMBOL CONDITIONS RANGE UNIT
Supply Voltage VCC –0.6 to +4.0 V
Voltage Applied to Any Pin VIO Relative to Ground –0.6 to VCC+0.4 V
Transient Voltage on any Pin VIOT <20nS Transient
Relative to Ground
–2.0V to VCC+2.0V V
Storage Temperature TSTG –65 to +150
°C
Lead Temperature TLEAD See Note
(3)
°C
Electrostatic Discharge Voltage
VESD Human Body Model
(4)
–2000 to +2000 V
Notes:
1. Specification for W25Q80BL is preliminary. See preliminary designation at the end of this document.
2. This device has been designed and tested for the specified operation ranges. Proper operation outside
of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device reliability.
Exposure beyond absolute maximum ratings may cause permanent damage.
3. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and
the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
4. JEDEC Std JESD22-A114A (C1=100pF, R1=1500 ohms, R2=500 ohms).
10.2 Operating Ranges
SPEC
PARAMETER SYMBOL CONDITIONS
MIN MAX
UNIT
Supply Voltage
(1)
VCC
F
R
= 50MHz
f
R = 25MHz (Read Data 03h)
2.3 3.6 V
Ambient Temperature,
Operating
T
A Industrial -40 +85 °C
Note:
1. VCC voltage during Read can operate across the min and max range but should not exceed ±10% of
the programming (erase/write) voltage.