• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • Q48SK12025NNFA PDF文件及第8页内容在线浏览

Q48SK12025NNFA

Q48SK12025NNFA首页预览图
型号: Q48SK12025NNFA
PDF文件:
  • Q48SK12025NNFA PDF文件
  • Q48SK12025NNFA PDF在线浏览
功能描述: Delphi Series Q48SK, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/25A out, 300W
PDF文件大小: 404.41 Kbytes
PDF页数: 共13页
制造商: DELTA[Delta Electronics, Inc.]
制造商LOGO: DELTA[Delta Electronics, Inc.] LOGO
制造商网址: http://www.deltaww.com
捡单宝Q48SK12025NNFA
PDF页面索引
120%
DS_Q48SK12025_07012010
8
FEATURES DESCRIPTIONS
Over-Current Protection
The modules include an internal output over-current
protection circuit, which will endure current limiting for
an unlimited duration during output overload. If the
output current exceeds the OCP set point, the modules
will shut down (hiccup mode).
The modules will try to restart after shutdown. If the
overload condition still exists, the module will shut down
again. This restart trial will continue until the overload
condition is corrected.
Over-Voltage Protection
The modules include an internal output over-voltage
protection circuit, which monitors the voltage on the
output terminals. If this voltage exceeds the
over-voltage set point, the protection circuit will
constrain the max duty clcyle to limit the output voltage,
if the output voltage continlously increases the modules
will shut down, and then restart after a hiccup-time
(hiccup mode).
Over-Temperature Protection
The over-temperature protection consists of circuitry
that provides protection from thermal damage. If the
temperature exceeds the over-temperature threshold
the module will shut down. The module will restart after
the temperature is within specification.
Remote On/Off
The remote on/off feature on the module can be either
negative or positive logic. Negative logic turns the
module on during a logic low and off during a logic high.
Positive logic turns the modules on during a logic high
and off during a logic low.
Remote on/off can be controlled by an external switch
between the on/off terminal and the Vi (-) terminal. The
switch can be an open collector or open drain.
For negative logic if the remote on/off feature is not
used, please short the on/off pin to Vi (-). For positive
logic if the remote on/off feature is not used, please
leave the on/off pin to floating.
Figure 16: Remot e on/off im plementation
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价