165
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Large Can Aluminum Electrolytic Capacitors
FEATURES
• LOW PROFILE (20mm HEIGHT)
• EXTENDED TEMPERATURE RATING +105
°
C
• LOW DISSIPATION FACTOR AND LOW ESR
• HIGH RIPPLE CURRENT
• WIDE CV SELECTION
• SUITABLE FOR SWITCHING POWER SUPPLIES
NRLFW Series
SPECIFICATIONS
MECHANICAL CHARACTERISTICS:
1. Pressure Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure
is developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 sec onds.
Sleeve Color:
Dark Blue
Minus Polarity Marking
Insulation Sleeve
(4.0mm Leads Available As Option)
L ± 2.0 Max.
6.3 ± 1.0
Can Top Vent
10.0
∅d ± 1.0
10.0 ± 0.1
pcb hole spacing
(∅D)
Top of Spin
4.0
6.3 ± 1.0
Max. 2.0
Term
inal
(t=0.8)
*NON-STANDARD VOLTAGES FOR THIS SERIES
1.5
Operating Temperature Range -40 ~ +105°C -25 ~ +105°C
Rated Voltage Range 16 ~ 250Vdc 400Vdc
Rated Capacitance Range
68 ~ 10,000µF 33 ~ 100µF
Capacitance Tolerance ±20% (M)
Max. Leakage Current (µA)
After 5 minutes (20°C)
3 x C(µF)V
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc) 16 25 35 50 63 80 100 ~ 400
Tan δ max.
0.45 0.35 0.30 0.25 0.20 0.17 0.15
Surge Voltage
W.V. (Vdc) 16 25 35 50 63 80 100
S.V. (Vdc) 20 32 44 63 79 100 125
W.V. (Vdc) 160 200 250 400 400 - -
S.V. (Vdc) 220 250 300 400 450 - -
Ripple Current
Correction Factors
Frequency (Hz) 50 60 100 120 500 1K 10K ~ 50K
Multiplier at
105°C
16 ~ 100Vdc 0.93 0.95 0.99 1.00 1.05 1.08 1.15
160 ~ 400Vdc 0.75 0.80 0.95 1.00 1.20 1.25 1.40
Low Temperature
Stability (16 to 250Vdc)
Temperature (°C) 0 -25 -40 - - - -
Capacitance Change -5% -10 -30% - - - -
Impedance Ratio 1.5 3 9 - - - -
Load Life Test
2,000 hours at +105°C
Capacitance Change Within ±20% of initial measured value
Tan δ
Less than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
Shelf Life Test
1,000 hours at +105°C
(no load)
Capacitance Change Within ±20% of initial measured value
Tan δ
Less than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
Surge Voltage Test
Per JIS-C-5141 (table #6, #4)
Surge voltage applied: 30 seconds
"On" and 5.5 minutes no voltage "Off"
Capacitance Change Within ±20% of initial measured value
Tan δ
Less than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
Soldering Effect
Refer to
MIL-STD-202F Method 210A
Capacitance Change Within ±10% of initial measured value
Tan δ
Less than specifi ed maximum value
Leakage Current Less than specifi ed maximum value
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
