NEV, NEH SERIES
ALUMINUM ELECTROLYTIC 6.3V to 100V
2
NTE Electronics, Inc. D Voice (800) 631-1250 (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
SUBMINIATURE
(NEV: Radial Lead, NEH: Axial Leads)
The NEV and NEH series subminiature aluminum electrolytic c a-
pacitors are especially suitable for applications requiring high ca -
pacitance, low cost, and very small size. In fact, you’ll find these
capacitors in some of the most demanding applications, from
precision medical electronics and automobiles to the newest
personal computers and disk drives.
They operate over a broad temperature range and are available
in either blister pack or bulk.
RATINGS
Capacitance Range: 0.1µf to 22,000µf
Tolerance: ±20%
Voltage Range: 6.3V to 100V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
-40°C to +85°C (-40°F to +185°F)
Leakage Current: I ≤ 0.01CV + 3µA (measured after
3 minutes of applied voltage)
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
Capacitance Tolerance (M): ±20%
measured at +20°C (+68°F), 120H
Z
Dissipation Factor: measured at +20°C (+68°F),120H
Z
Rated Voltage 6.3 10 16 25 35 50-80 100
0.1µf to 1000µf 0.24 0.2 0.17 0.15 0.12 0.10 0.08
1000µf to 22,000µf Values above plus 0.02 for each 1000µf
Impedance Ratio at Low Temperature: 120H
Z
Comparison Z WV 6.3 10 16 25 35 50-100
Z @ -25°C (-13°F)/
Z @ +20°C (+68°F)
4 3 2 2 2 2
Z @ -40°C (-40°F)/
Z @ +20°C (+68°F)
8 6 4 4 4 4
Surge Voltage:
DC Rated Voltage 6.3 10 16 25 35 50 63 100
Surge Voltage 8 13 20 32 44 63 79 125
Load Life: 1000 ±12Hrs @ +85°C (+185°F),
at rated voltage
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: See Table
Rated Voltage Capacitance Change Max
6.3V to 16V Within ±30% of the initial value
25V to 100V Within ±20% of the initial value
Shelf Life: 1000 Hrs @ +85°C (+185°F),
no voltage applied
Leakage Current: Within ±200% of specified value
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: Within ±20% of initial value
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL-STD 202, Method 208
Marking:
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum
ether, propanol and/or commercial detergents. Halo-
genated hydrocarbon cleaning agents such as Freon
(MF, TF, or TC), trichloroethylene, trichloroethane, or
methylchloride are not recommended as they may
damage the capacitor.
CASE SIZE AND DIMENSIONS:
D’ Ø = D Ø + 0.5 Max L ’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
NEV SERIES
NEH SERIES (Insulating Bar = Negative)
Insulating
Sleeve
L
35.0 Min 35.0 MinL’
2.3 Max
d Ø
D Ø
D’ Ø
D Ø
D’ Ø
Insulating
Sleeve
d Ø
L
L’ 5.0 Min
18.0 Min
A ±0.5
ORDERING INFORMATION
NEV 47 M 50
Series
Capacitance
Tolerance
Voltage
