▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
6. Capacitance (Tolerance)
Specified
Value
Temperature
Compensating(Class1)
Standard
C□
U□
SL
0.2pF≦C≦5pF : ±0.25pF
0.2pF≦C≦10pF : ±0.5pF
C>10pF : ±5% or ±10%
High Frequency Type CH
0.2pF≦C≦2pF : ±0.1pF
C>2pF : ±5%
High Permittivity (Class2)
BJ, B7, C6, C7, LD(※) : ±10% or ±20%,
F : +80/-20%
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type C≦10μF C>10μF
Preconditioning None Thermal treatment (at 150℃ for 1hr) Note 2
Measuring frequency 1MHz±10% 1kHz±10% 120±10Hz
Measuring voltage Note 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms
Bias application None
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating(Class1)
Standard
C<30pF : Q≧400+20C
C≧30pF : Q≧1000 (C:Nominal capacitance)
High Frequency Type Refer to detailed specification
High Permittivity (Class2) Note 1 BJ, B7, C6, C7:2.5% max., F:7% max.
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type C≦10μF C>10μF
Preconditioning None Thermal treatment (at 150℃ for 1hr) Note 2
Measuring frequency 1MHz±10% 1GHz 1kHz±10% 120±10Hz
Measuring voltage Note 1 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms
Bias application None
High Frequency Type
Measuring equipment : HP4291A
Measuring jig : HP16192A
8. Temperature Characteristic (Without voltage application)
Specified
Value
Temperature
Compensating(Class1)
Standard
Temperature Characteristic [ppm/℃] Tolerance [ppm/℃]
C□ : 0 CG,CH, CJ, CK G : ±30
H : ±60
J : ±120
K : ±250
U□ : -750 UJ, UK
SL : +350 to -1000
High Frequency Type
Temperature Characteristic [ppm/℃] Tolerance [ppm/℃]
C□ : 0 CH H : ±60
High Permittivity (Class2)
Specification
Capacitance
change
Reference
temperature
Temperature Range
BJ
B ±10% 20℃ -25 to +85℃
X5R ±15% 25℃ -55 to +85℃
B7 X7R ±15% 25℃ -55 to +125℃
C6 X6S ±22% 25℃ -55 to +105℃
C7 X7S ±22% 25℃ -55 to +125℃
LD(※) X5R ±15% 25℃ -55 to +85℃
F
F +30/-80% 20℃ -25 to +85℃
Y5V +22/-82% 25℃ -30 to +85℃
Note : ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
(C
85
-C
20
)
×10
6
(ppm/℃)
C
20
×△T △T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step B、F X5R、X7R、X6S、X7S、Y5V
1 Minimum operating temperature
2 20℃ 25℃
3 Maximum operating temperature