Register 5: GPTM Interrupt Mask (GPTMIMR), offset 0x018
This register allows software to enable/disable GPTM controller-level interrupts. Writing a 1 enables
the interrupt, while writing a 0 disables it.
GPTM Interrupt Mask (GPTMIMR)
Timer0 base: 0x4003.0000
Timer1 base: 0x4003.1000
Timer2 base: 0x4003.2000
Timer3 base: 0x4003.3000
Offset 0x018
Type R/W, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
TATOIMCAMIMCAEIMRTCIMreservedTBTOIMCBMIMCBEIMreserved
R/WR/WR/WR/WROROROROR/WR/WR/WROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x00ROreserved31:11
GPTM CaptureB Event Interrupt Mask
The CBEIM values are defined as follows:
DescriptionValue
Interrupt is disabled.0
Interrupt is enabled.1
0R/WCBEIM10
GPTM CaptureB Match Interrupt Mask
The CBMIM values are defined as follows:
DescriptionValue
Interrupt is disabled.0
Interrupt is enabled.1
0R/WCBMIM9
GPTM TimerB Time-Out Interrupt Mask
The TBTOIM values are defined as follows:
DescriptionValue
Interrupt is disabled.0
Interrupt is enabled.1
0R/WTBTOIM8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7:4
June 22, 2010210
Texas Instruments-Production Data
General-Purpose Timers