DescriptionResetTypeNameBit/Field
GPTM Timer A Stall Enable
The TASTALL values are defined as follows:
DescriptionValue
Timer A continues counting while the processor is halted by the
debugger.
0
Timer A freezes counting while the processor is halted by the
debugger.
1
If the processor is executing normally, the TASTALL bit is ignored.
0R/WTASTALL1
GPTM TimerA Enable
The TAEN values are defined as follows:
DescriptionValue
TimerA is disabled.0
TimerA is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
1
0R/WTAEN0
209June 22, 2010
Texas Instruments-Production Data
Stellaris® LM3S8530 Microcontroller