Register 23: Device Capabilities 7 (DC7), offset 0x028
This register is predefined by the part and can be used to verify uDMA channel features. A 1 indicates
the channel is available on this device; a 0 that the channel is only available on other devices in the
family. Most channels have primary and secondary assignments. If the primary function is not
available on this microcontroller, the secondary function becomes the primary function. If the
secondary function is not available, the primary function is the only option.
Device Capabilities 7 (DC7)
Base 0x400F.E000
Offset 0x028
Type RO, reset 0xFFFF.FFFF
16171819202122232425262728293031
DMACH16DMACH17DMACH18DMACH19DMACH20DMACH21DMACH22DMACH23DMACH24DMACH25DMACH26DMACH27DMACH28DMACH29DMACH30
reserved
ROROROROROROROROROROROROROROROROType
1111111111111111Reset
0123456789101112131415
DMACH0DMACH1DMACH2DMACH3DMACH4DMACH5DMACH6DMACH7DMACH8DMACH9DMACH10DMACH11DMACH12DMACH13DMACH14DMACH15
ROROROROROROROROROROROROROROROROType
1111111111111111Reset
DescriptionResetTypeNameBit/Field
Reserved
Reserved for uDMA channel 31.
1ROreserved31
SW
When set, indicates uDMA channel 30 is available for software transfers.
1RODMACH3030
I2S0_TX / CAN1_TX
When set, indicates uDMA channel 29 is available and connected to
the transmit path of I2S module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 1 transmit.
1RODMACH2929
I2S0_RX / CAN1_RX
When set, indicates uDMA channel 28 is available and connected to
the receive path of I2S module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 1 receive.
1RODMACH2828
CAN1_TX / ADC1_SS3
When set, indicates uDMA channel 27 is available and connected to
the transmit path of CAN module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
3.
1RODMACH2727
CAN1_RX / ADC1_SS2
When set, indicates uDMA channel 26 is available and connected to
the receive path of CAN module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
2.
1RODMACH2626
July 24, 2012236
Texas Instruments-Production Data
System Control
OBSOLETE: TI has discontinued production of this device.