DescriptionResetTypeNameBit/Field
Brown-Out Reset Raw Interrupt Status
DescriptionValue
A brown-out condition is currently active.1
A brown-out condition is not currently active.0
Note the BORIOR bit in the PBORCTL register must be cleared to cause
an interrupt due to a Brown Out Event.
This bit is cleared by writing a 1 to the BORMIS bit in the MISC register.
0ROBORRIS1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved0
July 24, 2012198
Texas Instruments-Production Data
System Control
OBSOLETE: TI has discontinued production of this device.