LM10
www.ti.com
SNOSBH4D –MAY 1998–REVISED MARCH 2013
Electrical Characteristics (continued)
T
J
=25°C, T
MIN
≤T
J
≤T
MAX
(Boldface type refers to limits over temperature range)
(1)
Parameter Conditions LM10BL LM10CL Units
Min Typ Max Min Typ Max
Offset voltage drift 2.0 5.0 μV/°C
Offset current drift 2.0 5.0 pA/°C
Bias current drift 60 90 pA/°C
Line regulation 1.2V (1.3V) ≤V
S
≤6.5V 0.001 0.01 0.001 0.02 %/V
0≤I
REF
≤0.5 mA, V
REF
=200 mV 0.02 0.03 %/V
Load regulation 0≤I
REF
≤0.5 mA 0.01 0.1 0.01 0.15 %
V
+
−V
REF
≥1.0V (1.1V) 0.15 0.2 %
Amplifier gain 0.2V≤V
REF
≤5.5V 30 70 20 70 V/mV
20 15 V/mV
Feedback sense voltage 195 200 205 190 200 210 mV
194 206 189 211 mV
Feedback current 20 50 22 75 nA
65 90 nA
Reference drift 0.002 0.003 %/°C
Supply current 260 400 280 500 μA
500 570 μA
Definition of Terms
Input offset voltage:That voltage which must be applied between the input terminals to bias the unloaded
output in the linear region.
Input offset current:The difference in the currents at the input terminals when the unloaded output is in the
linear region.
Input bias current:The absolute value of the average of the two input currents.
Input resistance:The ratio of the change in input voltage to the change in input current on either input with the
other grounded.
Large signal voltage gain:The ratio of the specified output voltage swing to the change in differential input
voltage required to produce it.
Shunt gain:The ratio of the specified output voltage swing to the change in differential input voltage required to
produce it with the output tied to the V
+
terminal of the IC. The load and power source are connected
between the V
+
and V
−
terminals, and input common-mode is referred to the V
−
terminal.
Common-mode rejection:The ratio of the input voltage range to the change in offset voltage between the
extremes.
Supply-voltage rejection:The ratio of the specified supply-voltage change to the change in offset voltage
between the extremes.
Line regulation:The average change in reference output voltage over the specified supply voltage range.
Load regulation:The change in reference output voltage from no load to that load specified.
Feedback sense voltage: The voltage, referred to V
−
, on the reference feedback terminal while operating in
regulation.
Reference amplifier gain:The ratio of the specified reference output change to the change in feedback sense
voltage required to produce it.
Feedback current: The absolute value of the current at the feedback terminal when operating in regulation.
Supply current:The current required from the power source to operate the amplifier and reference with their
outputs unloaded and operating in the linear range.
Copyright © 1998–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LM10
