▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
11. Over current
Specified Value
CAL45 Type No emission of smoke no firing.
LHL□□□
There shall be no scorch or short of wire.
LHLC08, LHLC10 : There shall be no firing.
FBA/FBR
Test Methods and
Remarks
LHL□□□・CAL45 Type :
Measuring current : Rated current×2
Duration : 5 min.
Number of measuring : one time
12. Terminal strength : bending
Specified Value
CAL45 Type
No abnormality such as cut lead, or looseness. LHL□□□
FBA/FBR
Test Methods and
Remarks
CAL45 Type :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Bending force
Mass reference
weight
0.3< φ d≦0.5 2.5 0.25
0.5< φ d≦0.8 5 0.50
LHL□□□・FBA/FBR :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Bending force
Mass reference
weight
0.3<φd≦0.5 2.5 0.25
0.5<φd≦0.8 5 0.5
0.8<φd≦1.2 10 1.0
13. Insulation resistance : between the terminals and body
Specified Value
CAL45 Type
LHL□□□ 100MΩ min.
FBA/FBR
Test Methods and
Remarks
LHL□□□ :
Applied voltage : 500 VDC
Duration : 60 sec.
14. Insulation resistance : between terminals and core
Specified Value
CAL45 Type
LHL□□□
FBA/FBR 1MΩ min.
Test Methods and
Remarks
FBA/FBR :
Applied voltage : 100 VDC
Duration : 60±5 sec.
15. Withstanding : between the terminals and body
Specified Value
CAL45 Type
LHL□□□ No abnormality such as insulation damage
FBA/FBR
Test Methods and
Remarks
LHL□□□ :
According to JIS C5102. 7. 1. 3 (C)
Metal global method
Applied voltage : 500 VDC
Duration : 60 sec.