▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
6. Q
Specified Value
CAL45 Type
LHL□□□ Within the specified tolerance
FBA/FBR
Test Methods and
Remarks
LHL□□□ (except LHLP) :
Measuring equipment : LCR meter (HP4285A+HP42851A or its equivalent)
: LCR meter (HP4263A) or its equivalent (at 1kHz)
Measuring frequency : Specified frequency
7. DC Resistance
Specified Value
CAL45 Type
Within the specified tolerance LHL□□□
FBA/FBR
Test Methods and
Remarks
Measuring equipment : DC ohmmeter
8. Self resonance frequency
Specified Value
CAL45 Type
LHL□□□ Within the specified tolerance
FBA/FBR
Test Methods and
Remarks
LHL□□□(except LHLP) :
Measuring equipment : (HP4191A, 4192A) its equivalent
9. Temperature characteristic
Specified Value
CAL45 Type
LHL□□□ △L/L : Within ±7% (except LHLP16 : Within ±20%)
FBA/FBR
Test Methods and
Remarks
Change of maximum inductance deviation in step 1 to 5
Step
Temperature (℃)
LHL□□□
1 20
2 Minimum operating temperature
3 20 (Standard temperature)
4 Maximum operating temperature
5 20
10. Tensile strength test
Specified Value
CAL45 Type
No abnormality such as cut lead, or looseness. LHL□□□
FBA/FBR
Test Methods and
Remarks
CAL45 Type : Apply the stated tensile force progressively in the direction to draw terminal.
force (N) duration (s)
10 10
LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.
Nominal wire diameter tensile φd (mm) force (N) duration (s)
0.3<φd≦0.5 5
30±5
0.5<φd≦0.8 10
0.8<φd≦1.2 25
FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the axial direction
of the component during 10±1 seconds.