MASTER INSTRUMENT CORPORATION
MB1505
THRU
MB1510
KBPC15005
THRU KBPC1510
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
15 Amperes
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260
o
C/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
MB-35
0.033(0.84)
0.028(0.71)
0.252(6.4)
0.248(6.3)
0.252(6.4)
0.248(6.3)
0
.
0
9
(
2
.
3
)
D
I
A
0.472(12.0)
0.374(9.5)
0.46(11.7)
0.41(10.5)
DIA
0.205(5.2)
0.197(5.0)
0.570(14.5)
0.530(13.5)
0.666(16.9)
0.626(15.9)
1.14(28.9)
1.12(28.4)
0.728(18.5)
0.688(17.5)
1.14(28.9)
1.12(28.4)
0.666(16.9)
0.626(15.9)
-
+
AC
AC
EXOPY CASE
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
o
C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
MB1505
KBPC15005
MB151
KBPC1501
MB152
KBPC1502
MB154
KBPC1504
MB156
KBPC1506
MB158
KBPC1508
MB1510
KBPC1510
UNITS
Maximum Repetitive Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 Volts
Maximum Average Forward
Rectified Output Current, at T
C
=55℃(Note1,2)
I
(AV)
15 Amps
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
Method)
I
FSM
300 Amps
Rating for Fusing(t<8.3ms) I
2
T 373 A
2
S
Maximum Instantaneous Forward Voltage at 7.5A V
F
1.1 Volts
T
A
=25℃
10
µAmps
Maximum DC Reverse Current at
rated DC blocking voltage
T
A
=100℃
I
R
1.0 mAmps
Isolation Voltage from case to lugs V
ISO
2500 V
AC
Typical Thermal Resistance (Note 1,2)
R
θJC
2.0
℃/W
Operating Temperature Range T
J
-55 to +150 ℃
Storage Temperature Range T
STG
-55 to +150 ℃
NOTES:
1. Unit mounted on 5”×4”×3”(12.8×10.2 ×7.3mm) Al. finned plate.
2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
Web Site:
WWW.PS-PFS.COM
