MASTER INSTRUMENT CORPORATION
KBPC1505WN
THRU
KBPC1510WN
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
15 Amperes
Web
Site:
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Integrally molded heatsink provide very low thermal resistance
l High isolation voltage from case to lugs
l High temperature soldering guaranteed:
260
o
C/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E
method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5.0 in.-lbs torque max.
l Weight:0. 47ounce, 13.4 grams
0.042(1.10)DIA
0.038(0.97)TYP
0.78(19.8)MIN
0.32(8.2)
0.30(7.8)
0.47(11.9)
0.43(10.9)
0.732(18.6)
0.692(17.6)
1.13(28.8)
1.11(28.2)
0.732(18.6)
0.692(17.6)
-
+
AC
AC
EXOPY CASE
METAL HEAT SINK
0.205(5.2)
0.197(5.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
o
C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
KBPC
15005WN
KBPC
1501WN
KBPC
1502WN
KBPC
1504WN
KBPC
1506WN
KBPC
1508WN
KBPC
1510WN
UNITS
Maximum Repetitive Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 Volts
Maximum Average Forward
Rectified Output Current, at T
C
=55℃(Note1, 2)
I
(AV)
15 Amps
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
I
FSM
300 Amps
Rating for Fusing(t<8.3ms) I
2
T 373 A
2
S
Maximum Instantaneous Forward Voltage at 7.5A V
F
1.1 Volts
T
A
=25℃
10
µAmps
Maximum DC Reverse Current at rated
DC blocking voltage
T
A
=150℃
I
R
1.0 mAmps
Isolation Voltage from case to lug V
ISO
2500 V
AC
Typical Thermal Resistance (Note 1,2)
R
θJC
2.0
℃/W
Operating Temperature Range T
J
-55 to +150 ℃
Storage Temperature Range T
STG
-55 to +150 ℃
NOTES:
1. Unit mounted on 5”×4”×3” thick (12.8mm×10.2mm×7.3mm) Al. plate.
2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
WWW.PS-PFS.COM
