Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure relief
+
–
fd±0.05
●
High ripple current (at high frequency) : 40 % higher than ED Series
●
Endurance : 105 °C 8000 h to 10000 h
●
RoHS compliant
Features
Radial Lead Type
Series : EE Type : A
(Unit : mm)
Speci cations
Dimensions
0
D
10 12.5 16 18
0
d
0.6 0.6 0.8 0.8
F 5.0 5.0 7.5 7.5
Category temperature range
–25 °C to + 105 °C
Rated voltage range 160 V .DC to 450 V .DC
Capacitance range 10 µF to 330 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor
(tan d)
V.DC 160 200 250 350 400 450
(120 Hz/+20 °C)
tan d 0.15 0.15 0.15 0.20 0.24 0.24
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
010 : 8000 hours
012.5 to 018 : 10000 hours
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Rated voltage
(V.DC)
Capacitance
(µF)
Frequency (Hz)
60 < 120 < 300 < 1 k < 10 k < 100 k <
160 to 450
10 to 82 0.25 0.35 0.50 0.65 0.90 1.00
100 to 330 0.30 0.40 0.55 0.70 0.90 1.00
Frequency correction factor for ripple current
Mar. 201603
