Peripheral Features (Continued)
n Idle Timer (T0)
n MICROWIRE/PLUS Serial Interface (SPI Compatible)
n Full Duplex USART
n Two Analog Comparators
I/O Features
n Software selectable I/O options (TRI-STATE
®
Output,Push-Pull Output, Weak Pull-Up Input, and High
Impedance Input)
n Schmitt trigger inputs on ports G and L
n Eight high current outputs
n Packages: 28 SO with 24 I/O pins, 40 DIP with 36 I/O
pins, 44 PLCC, PQFP and CSP with 40 I/O pins
Fully Static CMOS Design
n Low current drain (typically
<
4 µA)
n Two power saving modes: HALT and IDLE
Temperature Range
n −40˚C to +85˚C, −40˚C to +125˚C
Development Support
n Windowed packages for DIP and PLCC
n Real time emulation and debug tools available
Block Diagram
10131744
FIGURE 1. COP8SGx Block Diagram
COP8SG Family
www.national.com 2
