© 2013 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com CCS-18/CS-18 Page 1
CCS-18\CS-18\072013\Q3
Series CCS-18/CS-18
High Power Multi-Throw DC–12 GHz
Normally Open Coaxial Switch
COAX SWITCHES
ELECTRICAL CHARACTERISTICS
Form Factor Multi-Throw,
break before make
Frequency Range
CCS-18
CS-18
DC–12 GHz
DC–12 GHz
Characteristic Impedance 50 Ohms
Operate Time 10 ms (max.)
Release Time 10 ms (max.)
Actuation Voltage Available 12 15 24 28 V
Actuation Current, max. @ ambient 600 700 230 270 mA
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
Operating Temperature
Commercial Model, CCS-18
Elite Model, CS-18
–40°C to 65°C
–55°C to 85°C
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
10 g’s RMS
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Standard Actuator Life
Actuator Life w/ Additional Features
3,000,000 cycles
1,000,000 cycles
Connector Type Type N or TNC
Humidity (Moisture Seal) Available
Weight 9 oz. (255.2g) (max.)
PART NUMBER DESCRIPTION
CCS-18 Commercial Normally Open Multi-throw, DC-12GHz
CS-18 Elite Normally Open Multi-throw, DC-12GHz
The CCS-18/CS-18 is a broadband multi-position coaxial switch designed to switch RF signals from one
input port to any one of 3 through 8 output ports. It is readily adapted to any 50 Ohms transmission line
system. The standard actuator gives individual solenoid control of each position and when de-energized,
all positions are open. Standard actuator voltage is 28 VDC. The primary advantage of this switch over
the miniature versions shown on previous pages is the higher power handling capability.
PART NUMBERING SYSTEM
For additional options, please contact factory.
Actuator Voltage
CCS-18 N 1 6 C - T
**
Series
Connectors
Actuator Type
Options
Number of Positions
* D-Sub Connector may be 9 or 15 pin depending on
number of throws. (See Connector Pinout page)
CONNECTOR ACTUATOR VOLTAGE NUMBER OF POSITIONS ACTUATOR TYPE OPTIONS
N
: TYPE N FEMALE 1: 28 VDC NORMALLY OPEN 3: SP3T 0: NO INDICATOR CONTACTS T: TTL DRIVERS WITH DIODES
T
: TNC FEMALE 2: 15 VDC NORMALLY OPEN 4: SP4TC: INDICATOR CONTACTS D: COIL TRANSIENT SUPPRESSION DIODES
3: 12 VDC NORMALLY OPEN 5: SP5TS: D-SUB CONNECTOR*
4: 24 VDC NORMALLY OPEN 6: SP6TTD: DECODERS AND TTL DRIVERS WITH
DIODES
7: SP7T
8: SP8TM: MOISTURE SEAL
**SEE PARTS LIST ON PAGE 13-16
PERFORMANCE CHARACTERISTICS: N CONNECTOR OPTION (TNC CONNECTOR, 11GHZ MAX.)
Frequency DC–3 GHz 3–6 GHz 6–9 GHz 9–12 GHz
Insertion Loss, dB,
max.
0.2 0.2 0.3 0.4
Isolation, dB, min. 80 80 80 75
VSWR , max. 1.3:1 1.3:1 1.5:1 1.7:1