© 2013 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com CCR-39S Page 1
CCR-39S/072013\Q3
Series CCR-39S
Multi-Throw DC-12 GHz, SP7T & SP8T
Latching Coaxial Switch
COAX SWITCHES
ELECTRICAL CHARACTERISTICS
Form Factor Multi-Throw,
break before make
Frequency Range
CCR-39S DC–12 GHz
Characteristic Impedance 50 Ohms
Operate Time 20 ms (max.)
Actuation Voltage Available 12 15 24 28 V
Actuation Current 110 105 90 105 mA
Reset Currents (# of positions)
(7) 770 735 630 735 mA
(8) 880 840 720 840 mA
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
Operating Temperature
Commercial Model, CCR-39S –40°C to 65°C
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
10 g’s RMS
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Standard Actuator Life
Actuator Life w/ Additional Features
3,000,000 cycles
1,000,000 cycles
Connector Type SMA
Humidity (Moisture Seal) Available
Weight 9 oz. (255.2g) (max.)
PART NUMBER DESCRIPTION
CCR-39S Commercial Latching Multi-throw, DC-12GHz
The CCR-39S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a
microwave signal from a common input to any of 7 or 8 outputs. The characteristic impedance is 50
Ohms. Each position has an individual actuator mechanism allowing random position selection. This also
minimizes switching time.
The CCR-39S comes with a latching actuator. The latching switch remains in the last position selected
when the switch is de-energized. STD dual command requires a reset pulse before a new selected
position. A separate reset circuit allows all positions to be set to an open position. User must provide both
reset (clear) and set (select new position) commands.
PART NUMBERING SYSTEM
For additional options, please contact factory.
Actuator Voltage
CCR-39 S 6 8 C - T
**
Series
Connectors
Actuator Type
Options
Number of Positions
CONNECTOR ACTUATOR VOLTAGE NUMBER OF POSITIONS ACTUATOR TYPE OPTIONS
S
: SMA FEMALE 6: 28 VDC LATCHING 7: SP7T 0: NO INDICATOR CONTACTS T: TTL DRIVERS WITH DIODES
7: 15 VDC LATCHING 8: SP8TC: INDICATOR CONTACTS D: COIL TRANSIENT SUPPRESSION DIODES
8: 12 VDC LATCHING R: POSITIVE + COMMON
9: 24 VDC LATCHING TD: DECODERS AND TTL DRIVERS WITH
DIODES
**
SEE PART NUMBER ON PAGE 10 M: MOISTURE SEAL
S
: D-SUB CONNECTOR*
* D-Sub Connector may be 15 or 26 pin depending on number of throws. (See
Connector Pinout page)
**
1
D-Sub Connectors is standard confi guration on all models unless
otherwise specifi ed
PERFORMANCE CHARACTERISTICS
Frequency DC–6 GHz 6–12 GHz
Insertion Loss, dB,
max.
0.2 0.4
Isolation, dB, min. 70 60
VSWR , max. 1.30:1 1.40:1
