© 2013 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com CCP-33S Page 1
CCP-33S\072013\Q3
Series CCP-33S
Low PIM, Miniature DC–3 GHz
Latching SPDT Coaxial Switch
COAX SWITCHES
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
Operating Temperature –40°C to 65°C
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
10 g’s RMS
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Standard Actuator Life 1,000,000 cycles
Connector Type SMA
Humidity (Moisture Seal) Available
Weight 1.65 oz. (46.78g) (max.)
PERFORMANCE CHARACTERISTICS
Frequency DC–3 GHz
Insertion Loss, dB, max. 0.2
Isolation, dB, min. 90
VSWR , max. 1.25:1
RF Power (cw), W, max 75W @3GHz
PART NUMBERING SYSTEM
Connecto r
S: SMA Female
Actuator Voltage
6: 28 Vdc Latching
7: 15 Vdc Latching
8: 12 Vdc Latching
9: 24 Vdc Latching
Actuator Type
0: Standard Contacts
C: Indicator Contacts
D: Self Cutoff Only
E: Indicators and Self Cutoff
**SEE PARTS LIST ON PAGES 6
Options
T: TTL Drivers with Diodes
D: Transient Suppression
Diodes
R: Positive + Common
N: Narrow Body
M: Moisture Seal
S: 9 Pin D-Sub Connector
Actuator Voltage
CCP-33 S 6 C - T **
Series
Connectors Actuator Type
Options
For additional options, contact factory.
PART NUMBER DESCRIPTION
CCP-33S Commercial Latching SPDT, DC-3 GHz
These switches are classifi ed to have extremely low passive intermodulation for use in narrow bandwidth
communications applications.
The CCP-33S is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave
signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The small
switches incorporate SMA connectors.
The CCP-33S series switch is offered with a latching actuator. This design is compatible with the two
most common mounting hole patterns. The CCP-33S series switch is interchangeable with a variety of
switches.
ELECTRICAL CHARACTERISTICS
Form Factor SPDT,
break before make
Frequency Range DC–3 GHz
Characteristic Impedance 50 Ohms
Switching Time 10 ms (max.)
Actuation Voltage Available 12 15 24 28 V
Actuation Current, max. @ ambient 140 170 90 65 mA
PASSIVE INTERMODULATION CHARACTERISTICS
Tone 1 Frequency
(MHz)
Tone 2 Frequency
(MHz)
IM3 Frequency
(MHz)
PIM Threshold
(dBc)
1945 1990 1900 -140.0
P1 P2 (dBm) PIM (dBc) PEAK PIM (dBc)
43 -143.1 -142.2
