AZ
GENERAL DATA
Life Expectancy
Mechanical 1 x 10
7
Electrical 1 x 10
5
at 10 A 240 VAC Res.
Operate Time (typical) 15 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1000 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms N.O. contact to coil
3000 Vrms N.C. contact to coil
10,000 V surge contact to coil
Insulation 1000 megohms min. at 20°C,
Resistance 500 VDC, 50% RH
Dropout 5% of nominal coil voltage
Ambient Temperature
Operating -40°C (-40°F) to 80°C (176°F)
-40°C (-40°F) to 105°C (221°F) sensitive coil
Storage -40°C (-40°F) to 130°C (266°F)
Vibration 1.5mm DA at 10–55 Hz
Shock 10 g
Enclosure Plastic
Terminals PC, tinned
Max. Solder Temp. 250°C (482°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C
Max. Immersion Time 30 seconds
Weight 12 grams
COIL
Power
At Pickup Voltage 300 mW standard coil
(typical) 140 mW sensitive coil
Max. Continuous 1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 48°C (86°F) at nominal coil voltage, std. coil
22°C (40°F) at nominal coil voltage, sens. coil
Temperature Max. 130°C (266°F)
CONTACTS
Arrangement SPST – N.O., SPDT
Ratings Non - inductive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10A
Max. switched voltage: 150* VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR, 10 A at 250 VAC, general use, 100k
10 A at 30 VDC resistive, 100K
1/8 HP at 125 VAC
1/4 HP at 250 VAC
TV-5 at 125 VAC (1 Form A only)
TÜV 10 A at 250 VAC resistive, 100k
10 A at 30 VDC resistive, 100k
Material Silver cadmium oxide or silver tin oxide
Resistance < 100 milliohms initially
(6 V, 1A voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Specifications subject to change without notice.
AZ673
MINIATURE
POWER RELAY
FEATURES
• Compact size for dense PCB layouts
• High power contacts (10A) for use in consumer
appliances, HVAC, TV
• Withstands surges of up to 10,000 volts
• Epoxy sealed version available
• Insulation Class B standard
• UL/CUR file E44211
• TÜV file R2134653
3/24/04W