AUSTIN SEMICONDUCTOR, INC.
FLASHFLASH
FLASHFLASH
FLASH
AS8FLC2M32
AS8FLC2M32B
Rev. 1.2 5/09
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
17
Austin Semiconductor, Inc.
DC Electrical Characteristics
Symbol Parameter Test Conditions Min Max Units Notes
ILI Input Load Current
Vin=Vss to Vcc, Vcc=Vcc MAX +/- 5.0 uA
ILIT A9 Input Load Current
Vcc=Vcc Ma,; A9=12.5v 160.0 uA
ILO Output Leakage Current
VOUT=VSS to VCC, VCC=VCC MAX +/-5.0 uA
14Mhz 120 mA 1,2
8Mhz 70 mA 1,2
VCC Standby Current During
Reset
VIL Input Low Voltage -0.5 0.8 V
VIH Input High Voltage 0.7xVCC VCC+0.3 V
Voltage for Autoselect and
Temporary Sector Unprotect
VOL Output Low Voltage
IOL=4.0mA, VCC=VCC MIN 0.45 V
VOH1
IOH=-2.0mA, VCC=VCC MIN 2.4
VOH2
IOH=-100uA, VCC=VCC MIN VCC-0.4
VLKO Low VCC Lock-Out Voltage 2.3 2.5 V 4
Notes:
[1] The ICC current listed is typically less than 8mA/Mhz, with OE\ at VIH
[2] Maximum ICC specifications are tested with VCC=VCC MAX
[3] ICC active while Embedded Program or Embedded Erase Algorithm is in progress
[4] Automatic sleep mode enables the low power mode when addresses remain stable for tACC + 30ns
[5] Not 100% Tested
uA
VID
11.5 12.5 V
RESET\=VCC +/- 0.3v
VIH=VCC +/- 0.3v, VIL=VSS +/- 0.3v
Automatic Sleep Mode
2,3,5
2
2
2,4
mA
uA
uA
ICC2
ICC3
ICC4
ICC5
ICC1
CE\=VIL, OE\=VIH
Vcc Active Read Current
Ouput High Voltage
VCC Standby Current
140
150
150
150
VCC=3.3v
CE\=VIL, OE\=VIH
VCC Active Write Current
CE\, RESET\=VCC +/- 0.3V
V