3 DATA SHEET - Rev 2.1
11/2012
ARA2017
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
Table 3: Operating Ranges
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under
these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
The device may be operated safely over these conditions; however, parametric performance is
guaranteed only over the conditions dened in the electrical specications.
Table 4: Digital Interface Specications
(VDD = +5.0 V)
Note:
(1) Logic control levels apply to the 3-wire programming bus (pins 9, 10, 11) and the transmit
enable control (pin 13).
PARAMETER
MIN
MAX UNIT
COMMENTS
Supply: V
DD
(pins 5, 14, 19, 21, 28),
V
ATTN
(pin 25)
0 +6 V
RF Power at Inputs (pins 1, 3)
-
+40
dBmV differential into 200
Digital Interface (pins 9, 10, 11, 13) -0.5 V
DD
+0.5 V
Storage Temperature -55 +150 °C
PARAMETER MIN TYP
MAX UNIT
Logic High Input Voltage: V
IN,HIGH +2.0 - VDD V
Logic Low Input Voltage: V
IN,LOW 0 - +0.8 V
PARAMETER MIN TYP MAX UNIT
Operating Frequency (f)5-8
Hz
Supply: V
DD
(pins 5, 14, 19, 21, 28) +4.5 +5 +5.5 V
Digital Interface (pins 9, 10, 11, 13)0-V
DD
V
Case Te mperature (T
C
)-40 +25+95 °C