99
AM5706, AM5708
www.ti.com
SPRS961B –AUGUST 2016–REVISED SEPTEMBER 2017
Submit Documentation Feedback
Product Folder Links: AM5706 AM5708
Terminal Configuration and FunctionsCopyright © 2016–2017, Texas Instruments Incorporated
Table 4-28. SDMA Signal Descriptions (continued)
SIGNAL NAME DESCRIPTION TYPE BALL
dma_evt4 System DMA Event Input 4 I H6
4.3.25.4 Interrupt Controllers (INTC)
NOTE
For more information, see the Interrupt Controllers section of the device TRM.
Table 4-29. INTC Signal Descriptions
SIGNAL NAME DESCRIPTION TYPE BALL
nmin_dsp Non maskable interrupt input, active-low. This pin can be optionally routed to the
DSP NMI input or as generic input to the ARM cores. Note that by default this pin
has an internal pulldown resistor enabled. This internal pulldown should be disabled
or countered by a stronger external pullup resistor before routing to the DSP or
ARM processors.
I L24
sys_nirq2 External interrupt event to any device INTC I AC10
sys_nirq1 External interrupt event to any device INTC I AB10
4.3.26 Power Supplies
NOTE
For more information, see Power, Reset, and Clock Management / PRCM Subsystem
Environment / External Voltage Inputs section of the device TRM.
Table 4-30. Power Supply Signal Descriptions
SIGNAL NAME DESCRIPTION TYPE BALL
vdd Core voltage domain supply
PWR J15, J16, J18, K12,
K18, L12, L17, M11,
M13, M15, M17, N11,
N13, N15, N18, P10,
P12, P14, P16, P18,
R10, R12, R14, R16,
R17, T11, T13, T15,
T17, T9, U11, U13,
U15, U18, U9, V10,
V12, V14, V16, V18,
W10, W12, W14, W16