7
AM5706, AM5708
www.ti.com
SPRS961B –AUGUST 2016–REVISED SEPTEMBER 2017
Submit Documentation Feedback
Product Folder Links: AM5706 AM5708
Device ComparisonCopyright © 2016–2017, Texas Instruments Incorporated
Table 3-1. Device Comparison (continued)
FEATURES
Device
AM5708 AM5706
Camera Adaptation Layer (CAL) Camera Serial Interface 2 (CSI2)
CSI2_0 1 CLK + 2 Data
CSI2_1 Not Supported
(1)
Multichannel Audio Serial Port (McASP)
McASP1 16 serializers
McASP2 16 serializers
McASP3 4 serializers
McASP4 4 serializers
McASP5 4 serializers
McASP6 4 serializers
McASP7 4 serializers
McASP8 2 serializers
MultiMedia Card/Secure Digital/Secure Digital Input Output Interface
(MMC/SD/SDIO)
MMC1 1x UHSI 4b
MMC2 1x eMMC 8b
MMC3 1x SDIO 8b
MMC4 1x SDIO 4b
PCI Express 3.0 Port with Integrated PHY
PCIe_SS1
Up to two lanes (second lane shared with
PCIe_SS2 and USB1)
PCIe_SS2
Single lane (shared with PCIe_SS1 and
USB1)
2x Programmable Real-Time Unit Subsystem and Industrial
Communication Subsystem (PRU-ICSS)
PRU-ICSS1 Yes
PRU-ICSS2 Yes
Serial Advanced Technology Attachment (SATA) SATA Not Supported
(1)
Real-Time Clock Subsystem (RTCSS) RTCSS Not Supported
(1)
Multichannel Serial Peripheral Interface (McSPI) McSPI 4
HDQ1W HDQ1W Yes
Quad SPI (QSPI) QSPI Yes
Spinlock Module SPINLOCK Yes
Keyboard Controller (KBD) KBD Yes
Timers, General-Purpose TIMERS GP 16
Timer, Watchdog WD TIMER Yes
Pulse-Width Modulation Subsystem (PWMSS)
PWMSS1 Yes
PWMSS2 Yes
PWMSS3 Yes
Universal Asynchronous Receiver/Transmitter (UART) UART 10
Universal Serial Bus (USB3.0)
USB1 (Super-
Speed, Dual-Role-
Device [DRD])
Yes
Universal Serial Bus (USB2.0)
USB2 (High-Speed,
Dual-Role-Device
[DRD], with
embedded HS PHY)
Yes
USB3 (High-Speed,
OTG2.0, with ULPI)
Not Supported
(1)
USB4 (High-Speed,
OTG2.0, with ULPI)
Not Supported
(1)
(1) Features noted as “not supported,” must not be used. Their functionality is not supported by TI for this family of devices. These features
are subject to removal without notice on future device revisions. Any information regarding the unsupported features has been retained
in the documentation solely for the purpose of clarifying signal names or for consistency with previous feature descriptions.
(2) IPU2 subsystem is dedicated to IVA support and is not available for other processing.
(3) For more details about the CTRL_WKUP_STD_FUSE_DIE_ID_2 register and Base PN bitfield, see the AM571x Technical Reference
Manual.