66
AM5706, AM5708
SPRS961B –AUGUST 2016–REVISED SEPTEMBER 2017
www.ti.com
Submit Documentation Feedback
Product Folder Links: AM5706 AM5708
Terminal Configuration and Functions Copyright © 2016–2017, Texas Instruments Incorporated
4.3 Signal Descriptions
Many signals are available on multiple pins, according to the software configuration of the pin multiplexing
options.
1. SIGNAL NAME: The name of the signal passing through the pin.
NOTE
The subsystem multiplexing signals are not described in Table 4-1 and Table 4-31.
2. DESCRIPTION: Description of the signal
3. TYPE: Signal direction and type:
– I = Input
– O = Output
– IO = Input or output
– D = Open Drain
– DS = Differential
– A = Analog
– PWR = Power
– GND = Ground
4. BALL: Associated ball(s) bottom
NOTE
For more information, see the Control Module / Control Module Register Manual section of
the device TRM.
4.3.1 VIP
NOTE
For more information, see the Video Input Port (VIP) section of the device TRM.
Table 4-2. VIP Signal Descriptions
SIGNAL NAME DESCRIPTION TYPE BALL
Video Input 1
vin1a_clk0 Video Input 1 Port A Clock input.Input clock for 8-bit 16-bit or 24-bit Port A video
capture. Input data is sampled on the CLK0 edge.
I G3, J24, Y5
vin1a_d0 Video Input 1 Port A Data input I AA1, B23, F1, J25
vin1a_d1 Video Input 1 Port A Data input I B22, E2, Y3
vin1a_d2 Video Input 1 Port A Data input I A23, E1, W2
vin1a_d3 Video Input 1 Port A Data input I A22, AA3, C1
vin1a_d4 Video Input 1 Port A Data input I AA2, B21, D1
vin1a_d5 Video Input 1 Port A Data input I A21, D2, Y4
vin1a_d6 Video Input 1 Port A Data input I B1, D19, Y1
vin1a_d7 Video Input 1 Port A Data input I B2, E19, Y2
vin1a_d8 Video Input 1 Port A Data input I C2, F16
vin1a_d9 Video Input 1 Port A Data input I D3, E16
vin1a_d10 Video Input 1 Port A Data input I A2, E17
vin1a_d11 Video Input 1 Port A Data input I A19, B3
vin1a_d12 Video Input 1 Port A Data input I B18, C3
vin1a_d13 Video Input 1 Port A Data input I B16, C4
vin1a_d14 Video Input 1 Port A Data input I A3, B17