Series AM30E-Z
30Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.D 2 of 4 North America only
Input Specifications (continued)
Parameters Nominal Typical Maximum Units
Under voltage lockout
12V ON/OFF 8.6 / 7.9
VDC 24V ON/OFF 17.8 / 16
48V ON/OFF 33.5 / 30.5
Isolation Specifications
Parameters Conditions Typical Rated Units
Tested I/O voltage 3 sec 1600 VDC
Case/Input tested voltage 3 sec 1600 VDC
Resistance 1000 MOhm
Capacitance 1500 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accuracy ±1 %
Cross Regulation (Dual Output Models)
25% load on one output
100% load on second load
±5 %
Over voltage protection Zener diode clamp
Over current protection 150 %
Short Circuit protection Continuous
Short circuit restart Auto-Recovery
Thermal shutdown On Case 115 ºC
Line voltage regulation HL-LL ±0.5 %
Load voltage regulation (Single) 0 – 100% load ±0.5 %
Load voltage regulation (Dual) 0 – 100% load ±1 %
Temperature coefficient ±0.02 %/
o
C
Ripple & Noise 20MHz Bandwidth 100 mV p-p
Voltage adjustment range (single) ±10 %
Minimum Load Current 0 % of Max
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 330 KHz
Operating temperature Derating above 50 -40 to +75
o
C
Storage temperature -40 to +125
o
C
Maximum case temperature 105
o
C
Derating 2 %/
o
C
Cooling Free Air Convection
Humidity 95 % RH
Case material Nickel coated Copper
Weight 31 g
Dimensions (L x W x H) 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm
MTBF >435,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25ºC)hours
Maximum soldering temperature 1.5mm from case for 10 sec 260
o
C
Transient recovery time 250
mS
Transient recovery deviation ±3 %