IGLOO nano DC and Switching Characteristics
2-36 Revision 17
Timing Characteristics
Applies to 1.5 V DC Core Voltage
Applies to 1.2 V DC Core Voltage
Table 2-53 • 1.8 V LVCMOS Low Slew – Applies to 1.5 V DC Core Voltage
Commercial-Case Conditions: T
J
= 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.7 V
Drive Strength Speed Grade t
DOUT
t
DP
t
DIN
t
PY
t
PYS
t
EOUT
t
ZL
t
ZH
t
LZ
t
HZ
Units
2 mA STD 0.97 5.44 0.19 1.03 1.44 0.66 5.25 5.44 1.69 1.35 ns
4 mA STD 0.97 4.44 0.19 1.03 1.44 0.66 4.37 4.44 1.99 2.11 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-54 • 1.8 V LVCMOS High Slew – Applies to 1.5 V DC Core Voltage
Commercial-Case Conditions: T
J
= 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.7 V
Drive Strength Speed Grade t
DOUT
t
DP
t
DIN
t
PY
t
PYS
t
EOUT
t
ZL
t
ZH
t
LZ
t
HZ
Units
2 mA STD 0.97 2.64 0.19 1.03 1.44 0.66 2.59 2.64 1.69 1.40 ns
4 mA STD 0.97 2.08 0.19 1.03 1.44 0.66 2.12 1.95 1.99 2.19 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-55 • 1.8 V LVCMOS Low Slew – Applies to 1.2 V DC Core Voltage
Commercial-Case Conditions: T
J
= 70°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 1.7 V
Drive Strength Speed Grade t
DOUT
t
DP
t
DIN
t
PY
t
PYS
t
EOUT
t
ZL
t
ZH
t
LZ
t
HZ
Units
2 mA STD 1.55 5.92 0.26 1.13 1.59 1.10 5.72 5.92 2.11 1.95 ns
4 mA STD 1.55 4.91 0.26 1.13 1.59 1.10 4.82 4.91 2.42 2.73 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-56 • 1.8 V LVCMOS High Slew – Applies to 1.2 V DC Core Voltage
Commercial-Case Conditions: T
J
= 70°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 1.7 V
Drive Strength Speed Grade t
DOUT
t
DP
t
DIN
t
PY
t
PYS
t
EOUT
t
ZL
t
ZH
t
LZ
t
HZ
Units
2 mA STD 1.55 3.05 0.26 1.13 1.59 1.10 3.01 3.05 2.10 2.00 ns
4 mA STD 1.55 2.49 0.26 1.13 1.59 1.10 2.53 2.34 2.42 2.81 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
