II Revision 17
I/Os Per Package
IGLOO nano Device Status
IGLOO nano Devices AGLN010 AGLN015
1
AGLN020 AGLN060 AGLN125 AGLN250
IGLOO nano-Z Devices
1
AGLN030Z
1
AGLN060Z
1
AGLN125Z
1
AGLN250Z
1
Known Good Die 34 – 52 83 71 71 68
UC36 23 – – – – – –
QN48 34 – – 34 – – –
QN68 – 49 49 49 – – –
UC81 – – 52 66 – – –
CS81 – – 52 66 60 60 60
VQ100 – – – 77 71 71 68
Notes:
1. Not recommended for new designs.
2. When considering migrating your design to a lower- or higher-density device, refer to the IGLOO datasheet and IGLOO FPGA
Fabric User’s Guide to ensure compliance with design and board migration requirements.
3. When the Flash*Freeze pin is used to directly enable Flash*Freeze mode and not used as a regular I/O, the number of single-
ended user I/Os available is reduced by one.
4. "G" indicates RoHS-compliant packages. Refer to "IGLOO nano Ordering Information" on page III for the location of the "G" in
the part number. For nano devices, the VQ100 package is offered in both leaded and RoHS-compliant versions. All other
packages are RoHS-compliant only.
Table 1 • IGLOO nano FPGAs Package Sizes Dimensions
Packages UC36 UC81 CS81 QN48 QN68 VQ100
Length × Width (mm\mm) 3 x 3 4 x 4 5 x 5 6 x 6 8 x 8 14 x 14
Nominal Area (mm
2
) 9 16 36 36 64 196
Pitch (mm) 0.4 0.4 0.5 0.4 0.4 0.5
Height (mm) 0.80 0.80 0.80 0.90 0.90 1.20
IGLOO nano Devices Status IGLOO nano-Z Devices Status
AGLN010
Production
AGLN015
Not recommended for new designs.
AGLN020
Production
AGLN030Z Not recommended for new designs.
AGLN060
Production AGLN060Z Not recommended for new designs.
AGLN125
Production AGLN125Z Not recommended for new designs.
AGLN250
Production AGLN250Z Not recommended for new designs.