© 3M 2017 All Rights Reserved.
Technical Information Sheet
Product Number 9969
3M
Transfer Adhesive Tape featuring 3M
PCAT (Precision Cutting Adhesive
Technology)
Effective: September 2017
Supersedes all previous versions
Product Description:
3M
TM
9969 Transfer Adhesive Tape consists of a pressure sensitive acrylate adhesive
supplied between two clear, silicone coated polyester [PET] release liners with differential
release levels. This tape is provided wound on 3” diameter plastic cores.
Composition:
Silicone-coated clear PET Film
Pressure sensitive Neutral Acrylic
Silicone-coated clear PET Film
Adhesion to Stainless Steel
Minimum 20 oz/inch width (567 g/25 mm)
Maximum 20 gm/inch width (20 g/25 mm)
Adhesive Caliper (without release liners)
Average 25.4 ± 1.3 microns
1
Test methods available upon request.
Product Roll Dimensions: Product supplied on 3-inch (7.6 cm) diameter plastic cores.
48 inches (122 cm) + 1/16 inch (1.6 mm)
1640 yards (1500 meters) + 2%
Maximum 3 per 500 LY (457 meters)
Maximum 5 per 1000 LY (914 meters)
Maximum 7 per 1500 LY (1372 meters)
Splices are intended for continuous processing.
Shelf Life & Recommended Storage Conditions:
Product as supplied in original packaging will maintain stated test properties for a
period of one [1] year from date stamped on shipping container when stored at
temperatures of 50-80F (10-27C) and a relative humidity of 40-60 percent.
Please see reverse side for important product, safety and warranty information.
