Straight short backshell with C style clamp.
Same as CF but includes wire sealing grommet and
compression ring.
Long backshell with C style clamp.
Same as LCF but includes wire sealing grommet and
compression ring.
Environment proof.
Environment proof.
Environment proof.
Environment proof.
CF CLASS.... .........
CFZ CLASS............
LCFCLASS.............
LCFZ CLASS. .........
UN Suffix
FS Suffix
FSM Suffix
Applicable for rear mount only.
Can be added to any class where the application requires the flange with thru
mounting holes.
Example: CIR030RVFP-20-4P-F80 TABLE 1 (Refer to page 180)
Note:
If FP is not listed, the mounting holes are threaded (metric thread). TABLE 2
(Refer to page 180)
Applicable for rear mounting only.
Can be added to any class where application requires the flange with threaded holes.
Example: CIR030RVUN-20-4P-F80 TABLE 2 (Refer to page 180)
NOTE:
Mounting holes are threaded (UN thread)
Applicable for front mount only. Can be added to any class where application requires the
90° chamfered mounting holes to prevent screws from interfering with the rubber covered
coupling nut during the mating process. Used with metric screws.
Example: CIR00RVFS-20-4P-F80 TABLE 3 (Refer to page 180)
Applicable for front mount only. Can be added to any class where application requires the
82° chamfered mounting holes to prevent screws from interfering with the rubber covered
coupling nut during the mating process. Used with UN screws.
Example: CIR00RVFSM-20-4P-F80 TABLE 3 (Refer to page 180)
CIR01 CIR030
CIR030FP
CIR030UN
CIR020R/00
CIR070
Mounting Hole Options (refer to pages 179 & 180)
Classes For Terminating Jacketed Cable
straight
90°
FF Suffix Applicable for front mounting only. Can be added to any class where application
requires flange with threaded holes (metric thread).
FP Suffix