6
97 series solder type
how to order
97 – 3101 A – 28 – 21 S Y (959)
Series Number
97 - Amphenol
®
Product
Series Designation
Shell Type
3100 Wall Receptacle
3101 Cable Receptacle
3102 Box Receptacle
3106 Straight Plug
3107 Quick Disconnect Plug
3108 Angle Plug
Shell Construction
A - Solid Backshell (excluding 3108)
B - Split Backshell (only 3108)
Shell Size
8S, 10SL, 12S, 14S, 14, 16S, 16
18, 20, 22, 24, 28, 32, 36
Insert
Number
See insert availability listing - pages 4 & 5,
and see insert arrangement illustrations -
catalog 12-022 pages 6-11.
Shell Finish Non-RoHS
(621) Black zinc alloy
(689) Electroless nickel
(958) Conductive gray zinc nickel
**NEW**
RoHS Compliant
(946) Black zinc alloy
plating plus solder
contact less
(947) Electroless nickel plating
plus solder contact less
(959) Conductive gray zinc nickel
plating plus solder contact
less pre-filled cup
Alternate Insert Positions
Omit for standard position W, X, Y or Z
for alternate positions, depending
on insert (see catalog 12-022 page 12 for
positions available)
Contact Type
P = Pin
S = Socket
Example of part number for solder type connectors is given below.
Note: Accessories for 97 Series Connectors should
be ordered with matching connec tor plating.
See catalog 12-022 accessory pages 28-32.
* Contacts are not supplied with connectors, and must be
ordered separately. See following pages for contact
information.
Note:
Accessories for 97 Series Connectors should be
ordered with matching connector plating. See
catalog 12-022 accessory pages 28-32.
97 series crimp type
how to order
97 - 4101 A – 28 – 21 S Y (621)
Series Number
97 - designates
AMPHENOL 97 Series
Shell Type
4100 Wall Receptacle
4101 Cable Receptacle
4102 Box Receptacle
4106 Straight Plug
4107 Quick Disconnect Plug
4108 Angle Plug
Note: “4” in part number
designates crimp contact rear
release connector
Shell Construction
A - Solid Backshell (excluding 3108)
B - Split Backshell (only 3108)
Shell Size
10SL, 12S, 14S, 16S, 18, 20,
22, 24, 28, 32, 36
Insert
Number
See insert availability listing - catalog 12-022
page 20, and see insert arrangement
illustrations - catalog 12-022 pages 21
and 22.
Shell Finish Non-RoHS
Omit for standard bright
RoHS
Compliant
(621)
Black zinc alloy plating
(689)
Electroless nickel plating
(958)
Conductive gray zinc nickel
**NEW**
Example of part number for crimp type connectors is given below.
Alternate Insert Positions
Omit for standard position
W, X, Y or Z for alternate positions,
depending on insert (see catalog 12-022 page
20 for positions available)
Contact Type*
P = Pin
S = Socket