2
Inserts
Insert Insert &
(Pin or Socket) Grommet Assy.
• Solder
• Crimp
• Metal Clip Retention
• Dielectric Retention
May include a soft front interfacial seal (Bonded) if dielectric is
hard, and a rear sealing grommet separate or attached.
Nomenclature: Cylindrical Connectors and
Contacts
Shell Styles (Cont’d.)
Coupling
Threaded, Bayonet
Shell Sizes (Typical SAE AS5015 type)
8S, 10S, 10SL, 12S, 12,
14S, 14, 16S, 16, 18
20, 22, 24, 28, 32, 36, 40, 44, 48
“S” designates short shell and short contacts
Shell size denotes mating thread diameter in 16ths of an inch.
For example, a size 8 shell denotes 8/16 of an inch with a
.5000-28 UNEF thread.
Style Designation (PT)
PLUG SHELL STYLES
06 Straight
08 Angle
09 Flange Mount Receptacle
05 Straight, Less Rear Accessory
RECEPTACLE SHELL STYLES
00 Wall M
ount
01 Cable Connecting or
Line Mount Receptacle
02 Box Mount
03 Wall Mount, Less Rear Accessory
04 Line Mount, Less Rear Accessory
07 Jam Nut
IH Solder Mount Hermetic
Contact and Contact Termination Style
Pin – Crimp*
Socket – Crimp*
Pin – Solder
Socket – Solder
Sizes by Wire Gauge, Examples:
*Crimp is removable
4/0 American
Wire Gauge 4/0
22D American Wire Gauge 22-28