L Series
Power Inlet Filters & Power Entry Modules
L Series
Dual Configuration Power Entry Module
3
175
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
UL Recognized
CSA Certified
VDE Approved
Ordering Information
6 E D L 1 S C M
Fuseholder Type
(pre-installed)
M – Metric
Omit for North American
M
ounting Type
C– Snap-In
Omit for flange mount
S
witch Option
S – DPST on/off switch
Omit for none
V
oltage Selection Positions
1 or 4
L
Series
Filter Type
D – General Purpose
H – Medical
omit for none
L
eakage current designation
E – Low Leakage (<0.5 mA)
Current Rating
2, 4 or 6A
EDL1S / EHL1S
Maximum leakage current each Line to Ground:
DL Models
HL Models
@ 120 VAC 60 Hz: .25 mA 2 A
@ 250 VAC 50 Hz: .50 mA 5 A
Hipot rating (one minute):
Line to Ground: 2250 VDC
Line to Line: 1450 VDC
Operating Voltage:
1S & 1SC models (fixed): 250 VAC max.
4 & 4C Suffix: 100, 120, 220 or 240 VAC.
Operating Frequency: 50/60 Hz
Rated Current: 2 to 6A
Required Fuse(s):
North American: one .25 x 1.25”
(not included)
Metric: two 5 x 20mm (not included)
Switch: DPST
10,000 operations at 51A max. inrush
Specifications
EDL4C / EHL4C
• Power entry module with switch or fuse
• For 10A capability and high performance filtering
see the P Series on page 192
• Two element circuit provides extended EMI
attenuation similar to EAB inlet filter
• North American or metric fuse holders
• Available with minimal leakage current for medical
applications (HL models)