• 当前位置:
  • 首页
  • >
  • PDF资料
  • >
  • 66AK2L06 PDF文件及第56页内容在线浏览

66AK2L06

66AK2L06首页预览图
型号: 66AK2L06
PDF文件:
  • 66AK2L06 PDF文件
  • 66AK2L06 PDF在线浏览
功能描述: 66AK2L06 Multicore DSPARM KeyStone II System-on-Chip (SoC)
PDF文件大小: 1516.59 Kbytes
PDF页数: 共298页
制造商: TI[Texas Instruments]
制造商LOGO: TI[Texas Instruments] LOGO
制造商网址: http://www.ti.com
捡单宝66AK2L06
PDF页面索引
[1] 页[2] 页[3] 页[4] 页[5] 页[6] 页[7] 页[8] 页[9] 页[10] 页[11] 页[12] 页[13] 页[14] 页[15] 页[16] 页[17] 页[18] 页[19] 页[20] 页[21] 页[22] 页[23] 页[24] 页[25] 页[26] 页[27] 页[28] 页[29] 页[30] 页[31] 页[32] 页[33] 页[34] 页[35] 页[36] 页[37] 页[38] 页[39] 页[40] 页[41] 页[42] 页[43] 页[44] 页[45] 页[46] 页[47] 页[48] 页[49] 页[50] 页[51] 页[52] 页[53] 页[54] 页[55] 页[56] 页[57] 页[58] 页[59] 页[60] 页[61] 页[62] 页[63] 页[64] 页[65] 页[66] 页[67] 页[68] 页[69] 页[70] 页[71] 页[72] 页[73] 页[74] 页[75] 页[76] 页[77] 页[78] 页[79] 页[80] 页[81] 页[82] 页[83] 页[84] 页[85] 页[86] 页[87] 页[88] 页[89] 页[90] 页[91] 页[92] 页[93] 页[94] 页[95] 页[96] 页[97] 页[98] 页[99] 页[100] 页[101] 页[102] 页[103] 页[104] 页[105] 页[106] 页[107] 页[108] 页[109] 页[110] 页[111] 页[112] 页[113] 页[114] 页[115] 页[116] 页[117] 页[118] 页[119] 页[120] 页[121] 页[122] 页[123] 页[124] 页[125] 页[126] 页[127] 页[128] 页[129] 页[130] 页[131] 页[132] 页[133] 页[134] 页[135] 页[136] 页[137] 页[138] 页[139] 页[140] 页[141] 页[142] 页[143] 页[144] 页[145] 页[146] 页[147] 页[148] 页[149] 页[150] 页[151] 页[152] 页[153] 页[154] 页[155] 页[156] 页[157] 页[158] 页[159] 页[160] 页[161] 页[162] 页[163] 页[164] 页[165] 页[166] 页[167] 页[168] 页[169] 页[170] 页[171] 页[172] 页[173] 页[174] 页[175] 页[176] 页[177] 页[178] 页[179] 页[180] 页[181] 页[182] 页[183] 页[184] 页[185] 页[186] 页[187] 页[188] 页[189] 页[190] 页[191] 页[192] 页[193] 页[194] 页[195] 页[196] 页[197] 页[198] 页[199] 页[200] 页[201] 页[202] 页[203] 页[204] 页[205] 页[206] 页[207] 页[208] 页[209] 页[210] 页[211] 页[212] 页[213] 页[214] 页[215] 页[216] 页[217] 页[218] 页[219] 页[220] 页[221] 页[222] 页[223] 页[224] 页[225] 页[226] 页[227] 页[228] 页[229] 页[230] 页[231] 页[232] 页[233] 页[234] 页[235] 页[236] 页[237] 页[238] 页[239] 页[240] 页[241] 页[242] 页[243] 页[244] 页[245] 页[246] 页[247] 页[248] 页[249] 页[250] 页[251] 页[252] 页[253] 页[254] 页[255] 页[256] 页[257] 页[258] 页[259] 页[260] 页[261] 页[262] 页[263] 页[264] 页[265] 页[266] 页[267] 页[268] 页[269] 页[270] 页[271] 页[272] 页[273] 页[274] 页[275] 页[276] 页[277] 页[278] 页[279] 页[280] 页[281] 页[282] 页[283] 页[284] 页[285] 页[286] 页[287] 页[288] 页[289] 页[290] 页[291] 页[292] 页[293] 页[294] 页[295] 页[296] 页[297] 页[298] 页
120%
66AK2L06
SPRS930 APRIL 2015
www.ti.com
6.4 Pullup/Pulldown Resistors
Proper board design should ensure that input pins to the device always be at a valid logic level and not
floating. This may be achieved via pullup/pulldown resistors. The device features internal pullup (IPU) and
internal pulldown (IPD) resistors on most pins to eliminate the need, unless otherwise noted, for external
pullup/pulldown resistors.
An external pullup/pulldown resistor needs to be used in the following situations:
Device Configuration Pins: If the pin is both routed out and not driven (in Hi-Z state), an external
pullup/pulldown resistor must be used, even if the IPU/IPD matches the desired value/state.
Other Input Pins: If the IPU/IPD does not match the desired value/state, use an external
pullup/pulldown resistor to pull the signal to the opposite rail.
For the device configuration pins (listed in Table 9-25), if they are both routed out and are not driven (in
Hi-Z state), it is strongly recommended that an external pullup/pulldown resistor be implemented.
Although, internal pullup/pulldown resistors exist on these pins and they may match the desired
configuration value, providing external connectivity can help ensure that valid logic levels are latched on
these device configuration pins. In addition, applying external pullup/pulldown resistors on the device
configuration pins adds convenience to the user in debugging and flexibility in switching operating modes.
Tips for choosing an external pullup/pulldown resistor:
Consider the total amount of current that may pass through the pullup or pulldown resistor. Be sure to
include the leakage currents of all the devices connected to the net, as well as any internal pullup or
pulldown resistors.
Decide a target value for the net. For a pulldown resistor, this should be below the lowest V
IL
level of
all inputs connected to the net. For a pullup resistor, this should be above the highest V
IH
level of all
inputs on the net. A reasonable choice would be to target the V
OL
or V
OH
levels for the logic family of
the limiting device; which, by definition, have margin to the V
IL
and V
IH
levels.
Select a pullup/pulldown resistor with the largest possible value that still ensures that the net will reach
the target pulled value when maximum current from all devices on the net is flowing through the
resistor. The current to be considered includes leakage current plus, any other internal and external
pullup/pulldown resistors on the net.
For bidirectional nets, there is an additional consideration that sets a lower limit on the resistance value
of the external resistor. Verify that the resistance is small enough that the weakest output buffer can
drive the net to the opposite logic level (including margin).
Remember to include tolerances when selecting the resistor value.
For pullup resistors, also remember to include tolerances on the DVDD rail.
For most systems:
A 1-kΩ resistor can be used to oppose the IPU/IPD while meeting the above criteria. Users should
confirm this resistor value is correct for their specific application.
A 20-kΩ resistor can be used to compliment the IPU/IPD on the device configuration pins while
meeting the above criteria. Users should confirm this resistor value is correct for their specific
application.
For more detailed information on input current (I
I
), and the low-level/high-level input voltages (V
IL
and V
IH
)
for the 66AK2L06 device, see Section 10.3. To determine which pins on the device include internal
pullup/pulldown resistors, see Table 6-2.
56 Terminals Copyright © 2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: 66AK2L06
购买、咨询产品请填写询价信息:(3分钟左右您将得到回复)
询价型号*数量*批号封装品牌其它要求
删除
删除
删除
删除
删除
增加行数
  •  公司名:
  • *联系人:
  • *邮箱:
  • *电话:
  •  QQ:
  •  微信:

  • 关注官方微信

  • 联系我们
  • 电话:13714778017
  • 周一至周六:9:00-:18:00
  • 在线客服:

天天IC网由深圳市四方好讯科技有限公司独家运营

天天IC网 ( www.ttic.cc ) 版权所有©2014-2023 粤ICP备15059004号

因腾讯功能限制,可能无法唤起QQ临时会话,(点此复制QQ,添加好友),建议您使用TT在线询价。

继续唤起QQ 打开TT询价