42
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Board-to-Board Products
FLATPAQ Connector Product Specifications
Materials
Insulators PPA, UL 94V-0 flammability rated, color black
Power Blades Copper alloy
Power Sockets Phosphor Bronze
Hot-Plug Power Sockets Crown Bands: Beryllium Copper
& Active Guide Sockets Holder: Phosphor Bronze
Signal Pin Contacts Solder termination: Brass
Press-fit: Phosphor Bronze
Signal Socket Contacts 1 Amp: Phosphor Bronze
3 Amp: Beryllium Copper
Passive Guide Pin Brass
Active Guide Pin Copper alloy
Finishes
Contacts Selectively plated gold
(30
microinches
minimum) with tin
on terminations, all over nickel
Passive Guide Pin Nickel
Active Guide Pin Silver
Electrical
Current Rating
UL 45 Amp
Power Contacts
CUR/CSA 32.5 Amp
Current Rating,
UL 35 Amp at 250V, 50 cycles
Hot-Plug Power Contacts
CUR/CSA 20 Amp at 250V, 50 cycles
Signal Contacts, 1 Amp UL 1 Amp, 250 VAC
CUR/CSA 1 Amp, 250 VAC
Signal Contacts, 3 Amp UL 3 Amp, 250 VAC
CUR/CSA 2.5 Amp, 250 VAC
Contact resistance Power 2 mΩ maximum initial, (3 mΩ maximum
after 500 cycles durability), at 35A per
MIL-STD-1344, Method 3004
Signal 15 mΩ maximum initial, (30 mΩ maximum
after 500 cycles durability), at 100mA, 20
mV, per MIL-STD-1344, Method 3002
Insulation Resistance 5,000 MΩ minimum at 500VDC for 2 minutes, per
MIL-STD-1344, Method 3003
Dielectric Strength 1,500 VDC for 1 minute, per MIL-STD-1344,
Method 3001
Mechanical
Insertion Force Power 4.0 lbf (17.8 N) maximum
Signal 5.0 ozf (1.4 N) maximum, using .0305″ (.775 mm)
diameter steel test pin
Extraction Force Power 1.0 lbf (4.4 N) minimum
Signal 0.5 ozf (0.1 N) minimum, using .0295″ (.749 mm)
diameter steel test pin
Contact Retention Power 10.0 lbf (44.4 N) minimum
(in insulator) Signal 5.0 lbf (22.2 N) minimum
Durability 500 Cycles, per MIL-STD-1344, Method 2016
Operating Temperature -40 to +105° C
Recommended PCB Hole Finished hole: 0.040 +/- .0030″ dia. (1.02 +/- .08 mm dia.)
Drilled hole: 0.0453 +/- .0005″ dia. (1.15 +/- .013 mm dia.)
Copper Plate: 0.0010″ (.025 mm) min. per surface
Tin Plate: 0.0003″ (.008 mm) min. per surface
Press-Fit Tooling Press fixture is recommended for compliant press-fit assemblies.
Consult Tyco Electronics for tool drawing
Marking Connectors are marked with manufacturer’s logo, part number and lot code