Board-to-Board Products
33
Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK High-Density Board-to-Board Power Connectors (Continued)
Contact Current Ratings
The graph to the right shows the current carrying capabili-
ties of an individual power contact,and that of multiple
contacts at 4.5, 6.0 and 7.5 mm contact spacing.
Safety Regulatory Agency Compliance
MINIPAK connectors have been evaluated and found to
comply with the UL1977 standard and the CSA standard
C22.2 No.182.3-M1987. Tyco Electronics will work with
customers to obtain application-specific regulatory certifi-
cations if needed.
Termination Tails
Mating Condition
Compliant Press-fit
for .093" min. thick PCB
Solder Tail
Connector Mounting
Dimension “A”
Long Tail Short Tail
.180 ± .020 .120 ± .020
4.57 ± 0.51 3.07 ± 0.51
Material
Insulators PPA, UL 94V-0 flammability rated, color black
Socket contacts Phosphor bronze alloy
Signal pins Brass alloy
Power blades Copper alloy
Plating
Contacts Selective 30 microinches gold over nickel
Terminals Tin over nickel
Environmental/Mechanical
Connector operating temperature range -40°C to +130°C
Mating forces Power: 1.5lb/contact typical
Signal: 0.2lb/contact typical
Electrical
Contact current rating Individual power contact: 65A max.
1
Voltage ratings AC Power: 125/250VAC, signal & DC power: up to 60V
Insulation resistance 5000Ω at 500V DC for 2 minutes, per MIL-STD 1344, Method 3003
Dielectric strength Power 1,500VAC, signal 250VAC; for 1 minute, per MIL-STD 1344, Method 3001
1 This is the UL rating for an individual power contact. Current rating for any given configuration with multiple contacts will depend on contact layout, quantity
and spacing.
